Technical News
Find what you need fast and easily
May 2023
5/26/2023
- Cuttings of Interlock PVC code 6604548003 have been correcting (H-195) in PS7 and PS8 typologies
5/26/2023
- Standard glazing beads have been added on glazing
5/26/2023
- On pages 305 & 306 of the catalogue we demonstrate for all "Τ" profiles which drilling code we use
5/26/2023
- Machining for the adjusting profile installation in case the pre-drilled holes coincide with the position of the hinge’s attachment screws has been added on page 209
5/26/2023
- Threshold connection cap 310-11-527-00 for the thresholds S11563, S11527 has been added.
- Threshold connection corner 120-50-300-00 is no longer used.
- Cuttings for the threshold width S11527 and the machinigs of S11563, S11527 have been changed
5/17/2023
- Screw 798-21-242-19 (inox) has been changed into 798-41-242-19 (galvanise).
- Glazing setting blocks position has been added
5/17/2023
- 290-31-702-23 Setting block for 36mm glazing upper side has been added on the table of accessories for double glazing
5/17/2023
- 290-31-702-23 Setting block for 36mm glazing upper side has been added on the table of accessories for double glazing
5/17/2023
- Corners 113-19-262-00 and 125-23-266-00 have been removed from the frame M958
5/17/2023
- Alignment corner 1807715500 (stainless steel) has been replaced by 1807715501 (aluminium)
- The same for alignment corner 1807701100 (stainless steel) that has been replaced by 1807701101 (aluminium).
- The design of the Profile S77953 has been changed for easier installation
5/17/2023
- Alignment corner 1807715500 (stainless steel) has been replaced by 1807715501 (aluminium)
- The same for alignment corner 1807701100 (stainless steQDel) that has been replaced by 1807701101 (aluminium)
5/17/2023
- Profile cuttings for the frame width bottom S85000 and the Frame width top S85005 in the 3+3 corner typology outward opening No17.
- Widths and heighs of the glazing have been added on all typologies
April 2023
4/19/2023
- The chapters of profiles and accessories have been updated
4/19/2023
- In typology 3c Single sash INNER lift & slide with fixed panes we use flush handle 380004223ΧΧ. The flush handle has been added on the chapter of accessories
4/19/2023
- Dimensional limitation for sash S35013-adjoining profile S360-reinforcement M4579-sash S35013
4/19/2023
- Alignment corner 180-77-011-01 corrected into 180-77-155-01 for the hidden sashes Μ19755 and Μ19752 in European Groove Hardware Typologies
4/19/2023
- Rotation pin for motorized louvre code 7200560003 has been added on catalogue. It is now available in both white and black color. It is no more metallic, in order to avoid noise produced due to wind pressure.
4/19/2023
- Insulation profile 765-13-850-20 replaced by 765-13-850-30 due to optimal insulating material.
- Rolling shutter slat 303033 has been added on the chapter of profiles and also its end cap 765-30-303-30 added on the chapter of accessories.
- Roller shutter railing channel profile M1036 has been added on the chapter of profiles.
- Additional profile 303031 replaced by 303035 for optimal application during the installation.
- Precompressed sealing tapes 70-54-102-00, 770-35-510-00 & 770-35-715-00 have been added on the chapter of accessories.