My Workplace
My Watchlist
Here you can see those items that you saved into watch-list. You need to login in order see these items.
My Tools
Here you can see your contact or consulting request forms that you have submitted to Alumil. You need to login in order to have this information available.
Find what you need fast and easily
April 2024
4/26/2024
Learn more about the wind load resistance certification earned by Alumil's SMARTIA M5600 shading system through PLANECO, representing ift Rosenheim Hellas.
4/19/2024
ALUMIL maintained its growth trajectory in 2023, despite global challenges and the fluid international economic environment.
4/17/2024
- M7071 additional profile for the finishing of the barcode profiles has been added
- Additional decorative profile M7069 has been added
4/17/2024
- Section 12 for out->in Curtain wall has been added on the chapter of typologies sections
- Installation of bracket for out->in Curtain wall has been added on the chapter of general milling-tooling operations
- Fireproof fixing insert 6807000600 has been added on the chapter of accessories
- Span Length has been added page 244
4/17/2024
Frame corner 130-05-550-00 for frame P161 and its machinings have been added
4/17/2024
- New minimal horizontal flyscreen system (IFS typologies) has been added
4/17/2024
- End cap 3116316620 details for Two-sash sliding window with flyscreen and gutter have been added
- Flyscreen cutting has been corrected
4/17/2024
- Meeting stile machining S70734 for low threshold S70786 - S70790 has been updated
- Cutting Sh-4,5mm for cnc machining has been added in meeting stiles typologies with short frame guide use
4/17/2024
Inner glazing gaskets 200-04-023-01 (2-3mm) have been replaced by the below codes:
EX-2000900201 2mm
EX-2000900301 3mm
EX-2000900401 4mm
Inner glazing gaskets 200-04-067-01 (6-7mm) have been replaced by the below codes:
EX-2000900601 6mm
EX-2000900701 7mm
EX-2000900801 8mm
4/17/2024
- Entry guide 765-13-706-03 has been replaced by 765-13-000-00
- Intermediate rolling shutter divider 765-13-022-00 has been added on roller-shutters 137-020Ν, 137-220Ν, 138-020Ν & 138-220Ν
4/17/2024
- Standard cylinder 110mm 25-10-75 (30/80) ALUMIL NICKEL has been added on Locks page 399
- Frame for expansion joint has been added S77988
4/17/2024
- Add-on profile M9407 has been added on the profiles and its assembly with the profile M9334 on the chapter of assembly
March 2024
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18
3/28/2024
- Glazing has been update with separate chapter and glazing configuration for M84002 per glazing thickness has been added
3/28/2024
- Machinings 660-00-702-00 pvc for frame guides have been added
- Drainage plan for frame S70798 for fixed with sliding INDOOR has beed added
- In typology 20 Fixed with sliding INDOOR the cutting of the frame additional profile S70758 has been corrected
- S70758 machining that applies in typology Fixed with sliding INDOOR has been added
3/28/2024
- Corner locking machining has been added on pages 194, 195
3/28/2024
- Sections of the corner typologies have been updated
3/28/2024
- Two typologies 27 & 28 with winbreak Euronut Hardware have been added
- Two typologies 37 & 38 with winbreak
- Euro-groove Hardware have been added
- Hidden sashes have been added on diagrams of the sash dimension constraints
Search Knowledge base