Technical News
The SUPREME S77 catalogue has been renewed.
- New glazing lists have been added on the catalogue.
- Profiles S77926, S77928, S77930, S77141 and S77143 have been added on the catalogue.
New certification for the SUPREME S77 system from ift Rosenheim:
Pivot window in horizontal axis S77 (dimentions: 1500X1500)
- Air Permeability : Class 4
- Water tightness : Class E1050 (1050Pa)
- Resistance to wind load : C5/B5
The technical catalogue SMARTIA M9660 has been renewed.
Four new typologies without threshold have been added:
- Typology No. 22
- Typology No. 23
- Typology No. 34
- Typology No. 35
The technical catalogue SMARTIA S67 has been renewed.
The accessory code 415-37-365-00 is now a left accessory and the accessory code 415-37-366-00 is now a right accessory.
The technical catalogue SMARTIA M5600 has been renewed.
The accessory 720-05-603-00 has been replaced with 720-05-603-01 all over the catalogue
The technical catalogue SMARTIA S67 has been renewed.
The accessory code 620-11-600-00 has been changed to 620-11-500-00. Moreover, the accessory code 620-11-500-00 has been changed to 620-11-600-00, meaning they were swaped.
The technical catalogue SMARTIA S67 has been renewed.
The accessory code 620-11-600-00 has been changed to 620-11-500-00. Moreover, the accessory code 620-11-500-00 has been changed to 620-11-600-00, meaning they were swaped.
New profiles M5886 and AL5882 as well as the component 435.12.144.50 have been added.
New profiles M5886 and AL5882 have been added on page 19.
In the general milling chapter, there have been some changes in the content of the pages (more codes have been added).
Also in the accessories chapters, four new punches have been added.
In the general milling chapter, there have been some changes in the content of the pages (more codes have been added).
Also in the accessories chapters, four new punches have been added.
M8216 – 8/1.52/8 & 10/1.52/10
M8217 – 8/1.52/8 & 10/1.52/10
M8219 – 12/1.52/12
The accessory 110-05-156-00 has been changed to 110-05-136-00 on all pivot typologies.
We have created a new curtain wall bracket 700-70-084-00 with the following features:
- 52mm internal distance, ideal for 50mm mullions
- 1 vertical and 1 horizontal slot, used either for pin or roller support
Accessory 250-07-310-33 has been changed to 250-06-220-33