My Workplace
My Watchlist
Here you can see those items that you saved into watch-list. You need to login in order see these items.
Find what you need fast and easily
July 2019
7/31/2019
A PV-project of 600KW and 1.953 photovoltaic panels were installed with a 10-degree inclination at the city Podgorica
7/31/2019
Rolling ZIP-screens, hanging shutters of vertical shading, glass sliding system and LED lighting innovative equipment. Our advanced bioclimatic pergolas are an excellent holistic solution for outdoor spaces.
7/26/2019
The profiles S70826, S70828 added on catalog.
7/25/2019
Hinge addition and glazing setting block added on assembly for accessories chapter (Pages 198, 217)
7/19/2019
In the renewed Technical Catalogue we added:
- the new profile M8311 and an accessuary 830-03-311-00
- WOODALUX
7/19/2019
We have been awarded a new certificate for structural bonding applications, according to ETAG 002-1, a norm which needs to be followed when structural bonding is concerned. This certificate applies to all structural bonding applications, it is irrelevant of the system used, and it is valid for DOW Corning 895 structural silicone applied onto anodized profiles by ALUMIL. For example, if you notice on the first page of the M7 structural certificate from ift Rosenheim, it states the following in the comments section: {SSG-Bonding: For use in Europe a proof of the structures according to the "Guideline for European Technical Approval for Structural Sealant Glazing" ETAG No. 002 is required"}
This ETAG 002 certificate is a supportive document to the M7 structural certificate and all other structural bonding applications of ALUMIL. What this certificate guarantees, is the adhesion behavior of the silicone component used for the bonding onto ALUMIL anodized profiles.
This ETAG 002 certificate is a supportive document to the M7 structural certificate and all other structural bonding applications of ALUMIL. What this certificate guarantees, is the adhesion behavior of the silicone component used for the bonding onto ALUMIL anodized profiles.
7/19/2019
we have successfully tested our M8210 (infloor embedded profile) glass railing system at a maximum wind load of 4000Pa (83,5psf / 290km/h). The mock up dimensions were 1490mm (width) X 1606mm (height) and the glass used was laminate 10+10 with 4ple membrane without any handrail. The base profile used was M8210 profile. This is a very important certification, because it is based on wind load, a spec which is very often required for projects.
7/19/2019
In the renewed Technical Catalogue we added:
- Aller Retour doors (pages: 48, 49)
- Inward opening without threshold Door typologies (pages: 25, 26, 33, 34)
- Inward opening hung casement, hidden sash, with threshold typologies (pages: 41, 42, 46, 47)
7/19/2019
Correction on code number for the profile on page 32
7/19/2019
We corrected in the technical catalog the 180kg sash weight.
7/19/2019
The one point lock typologies have been removed from the technical catalogue.
7/9/2019
We would like to inform you that ALUMIL has developed a new profile, 303031, which is placed at the bottom of the rolling shutter, clicked on the terminal profile, to increase its overall mechanical performance.
This profile co-operates only with 35009 terminal profile and significantly enhances the shutter sturdiness and wind load resistance. The profile is accompanied by a pair of plastic caps, EX- 7653030100, as below. Both profiles and the corresponding caps are available for order.
Standard lengths
Furthermore, there has been a change in the standard length of two slats, meaning that M1011(77mm) and 303028 (55mm) slats are now available in 6.6m standard length.
7/4/2019
We have a new certificate for our SF85 bi-folding door, 3+0 typology. We have managed to increase the water tightness to 9A (600Pa) adding a subsil. Attached you can find the first page the test.
June 2019
6/30/2019
This version provides a significantly reduced visible aluminium face width and offers the ability to create double leaf windows.
6/30/2019
Find out the innovative systems that were chosen for this building complex in Iraq
6/30/2019
The new innovative product offers the look of natural wood. It is an excellent solution for a variety of applications such as decorative cladding, shading facades, and much more.
6/28/2019
Corrections made on hinges machinings (pages 98-107)
6/26/2019
Profiles and accessories are available. Note that in order for the typology to function properly, you must not use reinforced interlocking profiles where the fly screen is placed. For example, if the fly screen is placed on the outside track, you can only use reinforced interlock profile in the inner part of the section and vice versa. For heights more than 2.4m, a special corner cleat can be used (145-11-260-00), which creates a tension on the vertical profiles of the fly screen in order to keep the fly mesh stretched at all times. The specific corner which is patented should be used in combination with a steel rod, which will bend at the opposite direction of the deflection created due to the tension of the fly mesh, thus keeping the vertical fly screen profiles straight. This tension is created by a screw into the corner. By screwing, the rod will bend, and thus we can adjust the vertical alignment of the profiles. Attached you can find the typology in pdf and AutoCAD sections.
6/21/2019
The following changes were made to the catalog:
- changes in all even typologies
- profil cuttings and accessory quantities added on corner typology