Technical News
Find what you need fast and easily
December 2023
12/13/2023
- Add-on profile for hidden sash S77005 was replaced by S77016.
- Accessory 1607790803 Plastic transom cleat for S77phos has been added on typologies 18 & 35.
12/13/2023
- Add-on profile for hidden sash M19637 was replaced by M19633.
- Μachining for crimp corner cleats for the sash M19722 has been added on page 300.
12/13/2023
- Typology of Door M84FR with M7FR has been added.
- Alternative solution for faster installation.
- Glazing table and indicative bill of materials for external fire rated glazing have been added.
November 2023
11/23/2023
- Typology 6: Sash gasket 250-85-036-01 replaced with 250-85-044-03 and the brush 620-11-500-00.
- Typology 25: Additional width for S85035 has been corrected for 6 pieces to 3 pieces and Additional width for S85026 3 pieces has been added.
- Typology 29: Code of frame has been corrected. The right one is S85024.
- Typology 30: Cuttings for the sash width have been corrected.
11/23/2023
- Sash gasket 2506511000 replaced by 2506511103 for optimal operation.
- Lock adjustment instructions have been added on the chapter of General Milling-Tooling Operations.
- New typology No14 outward opening, 3panels on one side folding door.
11/23/2023
- Crimp corner cleat code 113-13-074-00 13,2X7,8 was replaced by 113-13-070-00 13Χ7mm for the sash P158.
11/23/2023
- Glazing bridge 290-77-002-00 has been replaced wit 290-77-005-00 for optimal operation.
- Threshold cap 15mm code 310-77-114-03 has been added on 4,7,15,17 typologies with low threshold S77774.
- Installation Profiles Chapter has been added.
11/23/2023
- General milling-tooling operations have been updated
October 2023
10/25/2023
- Glazing bridge 290-77-002-00 has been replaced with 290-77-005-00 for optimal operation.
- Dimensions have been corrected in pivot machinings.
- Reversing profile height has been corrected in pivot typology No72 Pivot horizontal axes.
- Reversing profile width has been corrected in pivot typology No73 Pivot vertical axes.
10/25/2023
- Glazing list for fixed glazing has been added (4-40mm)
10/25/2023
- New solution has been added: Section 13a for Single side-hung casement outdoor and Double side-hung casement outdoor, low threshold
10/25/2023
- Dimensions have been corrected in pivot machinings.
- Reversing profile height has been corrected in pivot typology No50 Pivot horizontal axes.
- Reversing profile width has been corrected in pivot typology No51 Pivot vertical axes.
10/25/2023
- Cuttings of sash M4544 have been corrected in typology PS8 Three Sash Sliding Window 90° Cut (Sash M4544) Right
10/25/2023
Glazing List for the typology PLS3 Two Sash Parallel Lift & Slide Window using S560-S584 and typology PLS4 Two Sash Parallel Lift & Slide Window large sash use only S584 have been corrected
10/25/2023
- Section No19 for the adjoining profile S31694 for meeting stile typologies has been corrected
10/25/2023
- The chapter of profile machinings has been updated
10/12/2023
- The bill of materials of the typology No14 Single sash entrance door opening outward with glass panel and kickplate has been corrected.
10/12/2023
- Profile M4587 (Glazing bead for powder coating) and Profile M4589 (Glazing bead for anodizing) have been added on the profiles chapter. Glazing beads have also been added on glazing list for sashes Μ4542 and M4544 and the glazing thickness is 21-25mm.
10/12/2023
- Profile M8238 (Base profile) and accessory 8305031380 (anchor) have been added.
- General catalog update.
10/12/2023
- 34 Entrance doors typologies have been added (No38-Νο71).
- Corner cleat machining has been updated.
- Machinings of the profile S77121 (decorative-narrow adjoining profile) have been added