Technical News
Find what you need fast and easily
June 2022
6/10/2022
- Μachining for hook profile for narrow fly-screen sash has been corrected.
6/10/2022
- Μachining for hook profile for narrow fly-screen sash has been corrected.
6/10/2022
- Glazing gaskets 200-08-00X-01 have been replaced with 200-09-00X-01 in all catalogue.
6/10/2022
- Maximum door dimensions per system have been corrected.
6/10/2022
- New typologies No5 (1 panel door) and No6 (2 leaf door) added on the chapter of typologies cutting lists.
- Glazing bridge 290-65-104-00 added on the chapters of accessories, cutting lists, sections and glazings.
6/2/2022
- Gasket for hook profile 240-00-462-01 has been replaced by 240-00-563-00 in all typologies with narrow hook profile and in all pocket typologies due to the difficulty of installation. For the rest typologies, the gasket remains the same.
- Glazing gaskets 200-08-00X-01 have been replaced with 200-09-00X-01 in all catalogue.
6/2/2022
- Gasket for hook profile 240-00-462-01 has been replaced by 240-00-563-00 in all typologies with narrow hook profile and in all pocket typologies due to the difficulty of installation. For the rest typologies, the gasket remains the same.
- Glazing gaskets 200-08-00X-01 have been replaced with 200-09-00X-01 in all catalogue.
6/2/2022
- Threshold M9403 added on profile 1:1 and on profile index.
6/2/2022
- Sections of P150 updated.
- Rectangle tube profile S-20x10x1,5 added on the chapter of profiles.
- Profiles S-30x30x1,3 & Γ-30x30x1,5 have been deleted from the chapter of profiles.
6/2/2022
- Glazing bridges have been added in the chapter of milling-tooling operations.
- Codes 720-35-001-00 & 720-35-002-00 have been removed and replaced by 720-35-006-00 & 720-35-007-00 respectively due to technical improvement.
May 2022
5/27/2022
- Replacement of frame adjusting profile to further reduce installation time.
- Profile S85014 is replaced with S85054, and S85028 is replaced with S85056. The frame adjuster accessory 424-85-014-01 is no longer needed.
- New screws are needed (798-83-308-16 & 798-21-448-32) which are presented in the relative catalogue sections (i.e. accessory cuttings and milling-tooling operation) with the adjusting profile installation for profiles S85054 and S85056 (p. 205).
- Glazing gaskets 200-08-00X-01 have been replaced with 200-09-00X-01.
- Moment of inertia Ix updated in all thermal break profiles. The measurement is per meter (<1,5 <2,0 <2,5 <3,0 <3,5 >3,5) and Ιx is calculated in compliance with EN 14024.
5/19/2022
- Corner cleat 113-33-123-00 (33Χ12,3) has been replaced by 113-33-132-00 (33Χ13,2) in typologies with hanged flyscreen 24 & 25 for optimal crimping.
- The dimension of sash drainage machining (applies to S70776) has been corrected in page 242 from 60mm to 20mm.
5/19/2022
- Code 7627080110 "E" safety Φ8 replaced by 8969618909 "E" safety Φ7 for optimal locking.
5/19/2022
- Code 7627080110 "E" safety Φ8 replaced by 8969618909 "E" safety Φ7 for optimal locking.
5/19/2022
- Sash fixing spacer code 311-12-511-00 added on the chapter of accessories.
- Glazing gasket 200-08-00Χ-01 has been replaced by glazing gasket 200-09-00Χ-01 in all catalogue.
5/19/2022
- Set of sash fixing spacers code 311-14-611-00 has been added on the chapter of accessories.
- Glazing gasket 200-08-00Χ-01 has been replaced by glazing gasket 200-09-00Χ-01 in all catalogue.
5/10/2022
Μ65140 threshold profile has been changed due to the fact that the old one was deemed inappropriate and can't be used. Cuttings also have been changed.
5/10/2022
- Cuttings for P200 slim have been corrected
5/10/2022
- Gasket for hook profile 240-00-462-01 has been replaced by 240-00-563-00 in all typologies with narrow hook profile and in all pocket typologies due to the difficulty of installation.
- Glazing gaskets 200-08-00X-01 have been replaced with 200-09-00X-01.
- Narrow sash S552 Machining has been added.