Technical News
Find what you need fast and easily
October 2021
10/7/2021
- Intermediate entry guide (set) 765-13-704-03 was replaced by 765-13-804-03 (piece) for better leveling (alignment) of the shutter, quite significant especially in the case of large perforation slats
10/7/2021
- Motor rail’s kick plate for sliding gate 1000mm has been added on the accessories chapter
September 2021
9/28/2021
- Assembly of flyscreen sash S490 with narrow sash S371 added on the Fabrication manual
9/28/2021
- Profiles S63174 (track profile), S63175 (track profile) and S63172 (subsill) were removed from the catalogue due to not perfect sealing of the flyscreen in 3 sash configurations.
9/28/2021
- Frame's mechanical corner cleat code 125-11-252-00 replaced by 125-11-257-00
- Using the offset corner cleat for S560 frame so that the punch pressing machine can perform the machining.
- Sash's mechanical corner cleat code 125-13-241-00 was replaced by 125-13-241-01.
- Using the offset corner cleat for S560 sash so that the punch pressing machine can perform the machining.
9/28/2021
- Sash's mechanical corner cleat code 125-13-241-00 was replaced by 125-13-241-01.
- Using the offset corner cleat for S560 sash so that the punch pressing machine can perform the machining.
- Assembly of flyscreen sash S490 with narrow sash S371 added on the Milling-Toolings operation chapter
9/28/2021
- Flat box 185X205mm (138-205) added on page 64
- Profiles 138024 and 138026 added on profiles and profiles index chapters Accessory 765-13-820-03 Insulators for side caps added on accessories chapter
9/28/2021
- 470-67-300-00 (CUTTING AID FOR S67 SASHES) & 470-67-400-00 (REVERSED CUTTING AID FOR S77 SASHES S67) added to the technical catalogue
9/28/2021
- 470-77-300-00 (CUTTING AID FOR S77 SASHES) & 470-77-400-00 (REVERSED CUTTING AID FOR S77 SASHES S77) added to the technical catalogue.
9/28/2021
Accessories that were added to the accessories chapter:
- 700-78-100-00 SET SUPPORT UNIT ON FLOOR WITH STOP CLIP and
- 700-78-200-00 SET SUPPORT UNIT ON FLOOR WITH FRONT MOUTED BRACKET added on the accessories chapter
9/15/2021
- Additional profile M12556 (water dripper) added on the profiles and profile index chapters
9/15/2021
- Glazing setting blocks updated on page 254
- Spacer for striker of hook single door lock code 470-85-028-00 replaced by 470-85-028-01
- Locking mechanism code 424-85-036-00 with visible screws and Locking mechanism code 424-85-037-00 with hidden screws added on accessories chapter
9/15/2021
- Sections for M9845 chapter for lighter constructions added on the technical catalogue
9/15/2021
3 typologies for ventilations panels were added to the technical catalogue:
- No 35 Single fixed with frame and integrated flyscreen
- No 36 Single fixed
- No 37 Single side-hung casement with glazing and integrated flyscreen
- Additional profile M9415 and louver M5613 added on the profiles 1:1 Chapters of profiles and accessories updated
9/15/2021
- Corner adjoining profile fixing details added on General Milling - Tooling Operations chapter (page 242)
- Low threshold sash details added on General Milling - Tooling Operations chapter (page 244)
- Placing hunged flyscreen and flyscreen handle 610-00-701-00 added on General Milling - Tooling Operations chapter (page 261-262)
- Accessories chapter updated
9/15/2021
- Additional profile M12556 (water dripper) added on the profiles and profile index chapters
9/15/2021
- 350-02-715-03 Hinge and 350-02-716-03 Hinge with spring replaced by 350-02-715-ΧΧ and 350-02-716-ΧΧ because they are available in white color also.
9/15/2021
- Accessories that added on the accessories chapter are : 471-60-930-00 L= 930MM, 471-61-030-00 L=1030MM, 471-61-130-00 L=1130MM (Windbreak Alu Plus Aluminium)
- 471-00-800-00 L=800mm, 471-00-900-00 L=900mm, 471-01-000-00 L=1000mm, 471-01-100-00 L=1100mm (Waterproofing Mechanism for Doors Aluminium with Rubber Seal)
- 471-71-230-00 L:1230mm, 471-71-130-00 L:1130mm, 471-71-030-00 L:1030mm, 471-70-930-00 L:930mm (Windbreak mini plus 13x28mm)
- Τhose accessories with the milling tools operations are added on the systems.
- Sashes that were deleted from the P100 system: M0012, M0013, M0063
9/15/2021
- The U-10x6x1,1 (80mm) was replaced with the accessory 702-10-611-00 at a cutting length of 80mm