Technical News
Find what you need fast and easily
December 2021
12/3/2021
- Code 798-21-248-32 (pan tapping screw) added on the profiles S67014-S67016-S67918-S67920-S67994 (hidden sashes) in the profiles chapter and in the accessories chapter
November 2021
11/29/2021
- Cuttings was corrected in the typology G "Four-sash parallel sliding window" in profiles: S31672, S31674, S31676
11/29/2021
- Tri fin seal brushes were replaced. Size increase (+1 mm) due to change of 3-fin brush type
11/29/2021
- Tri fin seal brushes were replaced. Size increase (+1 mm) due to change of 3-fin brush type
11/29/2021
- End caps 311-00-600-03 added on the accessories part list with flyscreen sash S371 and on the accessories chapter
11/29/2021
- Moment of interia Ix was updated in all thermal break profiles. The measurement is per meter (<1,5 <2,0 <2,5 <3,0 <3,5 >3,5) and Ιx is calculated in compliant with EN 14024
11/19/2021
- Quantities of the codes were updated: 311-31-606-00 (Foam gasket barrier), 311-31-604-22 (epdm foam barrier) and 311-31-606-10 (foam central seal)
11/19/2021
- Lift unit added on the catalogue of lift and slide mechanism
- System M450 added on the catalogue of lift and slide mechanism
11/19/2021
- New typology No39 "One sash door with fixed panel - inwards opening standard frame" added on M9660Phos chapter.
- Add-on profile M19637 added on profiles chapter of M9660Phos hidden sash and on the index of profiles concerning the specific typology
11/19/2021
- Profile S77623 (frame additional profile) added on the chapter of profiles 1:1
11/19/2021
- Profile S67644 (frame additional profile) added on the chapter of profiles 1:1
11/19/2021
- Cutting of interlock profile corrected to Fh-114mm if the track profile has no subsill and to Fh-127 if the track profile has subsill. Cutting of pocket window additional sealing profile M63170 is corrected to Fh-79.
October 2021
10/18/2021
- Max dimension of the typologies added on page 7
10/18/2021
- New typology Fixed - Lift & Slide Window - Fixed added on the technical catalogue
- Adjoining profile S539 added on the profiles chapter
- Accessories chapter updated
10/18/2021
- Profile cuttings were corrected as it regards the replacement of the trimming profile S35019 in all pocket typologies
10/18/2021
- Cutting for the interlock profile S35018 corrected from (Η-132,2mm) to (Η-120,8mm)
10/7/2021
- Fixing of transom-mullion connector added on the pages 214-215