Technical News
Find what you need fast and easily
November 2020
11/20/2020
- Sash dimension constraints have been added on the catalogue, on page 269.
11/20/2020
- Fabrication manual S67 Aller retour has been updated.
11/17/2020
- Additional profile S67038 is replaced with S67042 and also on 2 Door Aller retour typologies (No 48, 49)
11/12/2020
- Four new typologies No42, No43, No44, No45 opening outwards, have been added on the technical catalogue.
- New accessories have been added on the technical catalogue.
- New profiles added on the technical catalogue.
- New pages have been added on the General Milling-Tooling Operations chapter, for accessory 310-77-070-00 (pages 247-251)
- New pages have been added on the General Milling-Tooling Operations chapter, for accessory 310-77-050-03 (pages 252-254)
11/12/2020
- Accessories 160-23-000-00 and 250-65-016-01 have been added on the catalogue (page 245)
11/6/2020
- 135 corners have been added on Accessories chapter
October 2020
10/29/2020
- New corner phonotherm typologies have been added on the catalogue
10/22/2020
- S70820 (page 46), S70822 (page 47), S70824 (page 47) have been added on the catalogue
10/14/2020
- M14685 has been added on the catalogue (page 52)
10/14/2020
- Correction for profile S44048, correct profile S44040
- On page 114, correct cutting value: Fw/2 - 98
10/6/2020
- Full update for the technical catalogue.
10/6/2020
- New Cuttings and Concrete anchor (M8217 and M8219)
10/6/2020
- 210-77-223-03 , 255-77-223-03 have been removed from the technical catalogue
- 255-77-924-00 have been added on the technical catalogue
September 2020
9/30/2020
- Corrections on flyscreen cuttings (visible interlock) page 201, 205, 208
- The correct flyscreen track width for S70818: W-4mm
- The correct flyscreen frame additional profile S70812: W