Alumil India
Choose your local website

Technical News

Find what you need fast and easily
Search
July 2021
Renewal of the SMARTIA S560 technical catalogue
  • Dimensional limitation updated.
  • The calculation of the static diagrams is now made according to EN 14024
Renewal of technical catalogue SUPREME S700
  • Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024
  • General Milling-Tooling Operations chapter was updated
Renewal of technical catalogue SUPREME S650 Eclipse
  • Typology Af Two-sash sliding window with top-hung flyscreen added on the technical catalogue. Profiles, sections, typologies cutting lists and accessories updated.
Renewal of SUPREME SD115 technical catalogue
  • Four new typologies (no 4, no 6, no 9, no 12) with the new threshold S11536 and the additional profiles S11537 & S70773 added on the technical catalogue. Τhose profiles also added in the profiles chapter
  • Accessories that added to the technical catalogue: 210-11-536-03 (Central Gasket for SD115 Threshold), 250-11-514-03 (Frame gasket SD115), 250-11-516-03 (Frame gasket SD115) & 310-11-536-00 (Threshold connection cap)
  • Central gasket 220-10-003-03 was replaced with the central gasket 250-11-514-03 in all typologies.
  • Central gasket 220-10-004-03 was replaced with 250-11-516-03 in vent-frame head condition.
Renewal of technical catalogue SMARTIA M9660
  • Τ-profile M19874 added on the profiles 1:1. This profile is suitable with M19716 frame
Renewal of the SMARTIA M5600 technical catalogue
  • Profiles M5657 Louvre & M9010 cap added on the profiles index and profiles 1:1 chapters. The section is on page 43.
Renewal of technical catalogue SUPREME SF85
  • Typology for an outward opening 4-panels folding door (2+2) has been removed from the catalogue.
  • Τhe typologies with an even-even number of sashes (i.e. 2+2, 2+4, 4+4 etc.) are temporarily unavailable for technical reasons. 
Renewal of technical catalogue SUPREME S650 Eclipse
  • 6 typologies added: P1 Single-sash pocket window, P2 Two-sash pocket window, P3 Three-sash pocket window, P4 Four-sash pocket window, Pm1 Two-Sash with meeting stile pocket window, Pm2 Four-sash with meeting stile pocket window
Renewal of technical catalogue SUPREME S77

  • Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024

Renewal of technical catalogue SUPREME SD77
  • Primary & secondary sash sizing dimension for doors added on general milling tooling operations chapter


Renewal of technical catalogue SMARTIA FC80

  • New automations added on the accessories chapter.
Renewal of technical catalogue SMARTIA S67
  • Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024
  • Add-on profiles S67964 & S67048 added on the profile index & profile 1:1 chapters
Renewal of the SMARTIA S560 technical catalogue
  • Catalogue updated with gutter and subsills
  • The correct S35019 trimming was replaced in the sections of the pocket typologies and the profile cuttings for the widths for sashes, flyscreen sashes and shutters were corrected.
June 2021
Renewal of the technical catalogue COMFORT M9200
  • Central seal 311-00-700-00 replaced by 660-00-903-00
Renewal of technical catalogue SMARTIA M8200
  • Seal for anchor 290ml transparent code 770-54-662-00 added on the chapter of accessories.
  • The application of 770-54-662-00 added on the chapter of instructions page 78.
Renewal of technical catalogue SMARTIA M630
  • Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024. 
Renewal of the SUPREME S650 e-MOTION technical catalogue
  • 3 typologies added: No 3 Four-Sash with meeting stile, No 4 Four-Sash with meeting stile and fixed and No 5 2+2 sash sliding window with 90° inner corner meeting stile.
  • Profile S31735 (Reinforced sash) added on profile index and profiles 1:1.
  • Dimensional limitation chapter updated.
  • Accessory 311-31-620-03 (Set of end caps for corner typology) added on the chapter of accessories.
  • Electric Kits for all typologies added on the chapter of accessories.
Renewal of technical catalogue SMARTIA M9660
  • Maximum Dimensions of M19626 added on all typologies of M9660 phos
  • Milling tool for Hidden Sash code 852-19-634-00 added on the chapter of accessories
Renewal of technical catalogue SUPREME S700
  • Additional profiles S70802 & S70809 (caps) added on the index profiles and profiles 1:1.
  • Decorative track profiles for fixed sash added on the general milling-tooling operations chapter page 256.
  • Accessories 311-70-802-03 & 311-70-809-03 pair of end caps for S70802 & S70809 cap profiles for fix sash added on the chapter of accessories.
Renewal of technical catalogue SMARTIA S67 URBAN

Τechnical characteristics updated:

  • Glazing up to 44mm, Thermal insulation Uf = from 1,9 to 3,2 W/m2K
  • Accessories added on the chapter of accessories: 380-05-000-ΧΧ (door handle with rosette), 450-49-450-00 (door lock 3-point 45/85/24/3) & 440-00-450-00 (single point latch lock 45/85/22/3).