Technical News

• Sections for M9845 chapter for lighter constructions added on the technical catalogue

3 typologies for ventilations panels were added to the technical catalogue:

• No 35 Single fixed with frame and integrated flyscreen
• No 36 Single fixed
• No 37 Single side-hung casement with glazing and integrated flyscreen
• Additional profile M9415 and louver M5613 added on the profiles 1:1 Chapters of profiles and accessories updated

• Corner adjoining profile fixing details added on General Milling - Tooling Operations chapter (page 242)
• Low threshold sash details added on General Milling - Tooling Operations chapter (page 244)
• Placing hunged flyscreen and flyscreen handle 610-00-701-00 added on General Milling - Tooling Operations chapter (page 261-262)
• Accessories chapter updated

• Additional profile M12556 (water dripper) added on the profiles and profile index chapters

• 350-02-715-03 Hinge and 350-02-716-03 Hinge with spring replaced by 350-02-715-ΧΧ and 350-02-716-ΧΧ because they are available in white color also.

• Accessories that added on the accessories chapter are : 471-60-930-00 L= 930MM, 471-61-030-00 L=1030MM, 471-61-130-00 L=1130MM (Windbreak Alu Plus Aluminium)
• 471-00-800-00 L=800mm, 471-00-900-00 L=900mm, 471-01-000-00 L=1000mm, 471-01-100-00 L=1100mm (Waterproofing Mechanism for Doors Aluminium with Rubber Seal)
• 471-71-230-00 L:1230mm, 471-71-130-00 L:1130mm, 471-71-030-00 L:1030mm, 471-70-930-00 L:930mm (Windbreak mini plus 13x28mm)
• Τhose accessories with the milling tools operations are added on the systems.
• Sashes that were deleted from the P100 system: M0012, M0013, M0063

• The U-10x6x1,1 (80mm) was replaced with the accessory 702-10-611-00 at a cutting length of 80mm

• New base M8228 added on profiles chapter

• Accessories added on the accessories chapter: 470-19-670-00 Cutting jig for M9660 Eurogroove sash & 470-19-700-00 Cutting jig for M9660 Pvc groove sash

• The revised horizontal section in typology 8 (Single sash entrance door opening inward with glass Panel and one fixed side sash). Revised cutting lists and accessories are also added in this typology. In typology 9 (Single sash entrance door opening inward with glass Panellone fixed side sash with transom and kickplate) & typology 10 (Single sash entrance door opening inward with glass Panel one fixed side sash with vertical T and concealed drainage kickplate) we added S77564 Transom profile cutting dimensions
  

• Gasket for fly-screen 7,7 mm code 250-07-310-3x replaced by gasket for fly-screen 6,4 mm code 250-06-220-33, flyscreen net is fitted with gasket 6.4mm on M630 flyscreen profiles

• Added profiles, that correspond to the glazing list table

• Trimming profile S35019 was replaced in all pocket typologies. Cutting lists, profiles and accessories chapters are updated

• Trimming profile S35019 was added in all pocket typologies
• Profiles and accessories chapters are updated
• Upper Stopper 6601030100 added on the typology ils9 "Two Sash Meeting Stile Pocket Lift & Slide Window with Narrow Flyscreen and Shutter Short sash use only S560"

• Certificate DIN 18008-4 (ApB), which is very useful for the markets of Germany, Switzerland and Austria, is added on page 7.

• Dimensional limitation updated.
• The calculation of the static diagrams is now made according to EN 14024

• Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024
• General Milling-Tooling Operations chapter was updated

• Typology Af Two-sash sliding window with top-hung flyscreen added on the technical catalogue. Profiles, sections, typologies cutting lists and accessories updated.

• Four new typologies (no 4, no 6, no 9, no 12) with the new threshold S11536 and the additional profiles S11537 & S70773 added on the technical catalogue. Τhose profiles also added in the profiles chapter
• Accessories that added to the technical catalogue: 210-11-536-03 (Central Gasket for SD115 Threshold), 250-11-514-03 (Frame gasket SD115), 250-11-516-03 (Frame gasket SD115) & 310-11-536-00 (Threshold connection cap)
• Central gasket 220-10-003-03 was replaced with the central gasket 250-11-514-03 in all typologies.
• Central gasket 220-10-004-03 was replaced with 250-11-516-03 in vent-frame head condition.

• Τ-profile M19874 added on the profiles 1:1. This profile is suitable with M19716 frame