Technical News
Find what you need fast and easily
February 2020
2/10/2020
- Base profile screw 8305031300 has been added on the technical catalogue (sections M8209 and components list).
2/10/2020
- Accessory 600-03-250-00 has been added on catalog: Add-on for shutter rollers, page 114,118.
2/5/2020
- 313-17-448-00 , 290-67-908-03 , 290-00-003-00 , 290-00-005-00 accessories have been added on technical catalogue.
- No 40 , 45 typology corrections (Single side-hung casement, tilt and turn, with fixed hidden sash)
2/3/2020
- Vulcanized corner: 255-91-223-03 replaced by: 255-91-510-00
- Central gasket: 210-91-223-03 replaced by: 210-91-510-00
January 2020
1/31/2020
- New page : "Machining for Automatic Shoot bolt" added on General Milling Tooling Operations chapter, page 93
- Fabrication Manual added for SD115
1/29/2020
- Correction on S11514 Frame Lock Side dimension, (Hardware Machining), page 87
1/29/2020
- Alternative use of corner cleat 113 - 140 - 116 , on profiles 1:1
1/29/2020
- Alternative use of corner cleat 113 - 140 - 116 , on profiles 1:1
1/15/2020
Kooltherm code numbers replaced with NRG bar code numbers (profile 1:1 chapter)
1/13/2020
The Μ8217 and Μ8219 (1:1profiles, Sections and typology characteristics) have been added in the catalogue.
1/10/2020
- S67014 , S67016 profiles have been added on the catalogue.
1/10/2020
- 35mm locks have been removed from General Milling - Tooling Operations Chapter (pages 72-76)
1/9/2020
The screw (Μ8Χ30) 798.82.308.30 has been added for the NAXOS system.
December 2019
12/20/2019
The technical catalogue SMARTIA S67 has been renewed.
- S67914T - Profile for hidden sash has been added on the catalogue.
12/19/2019
The technical catalogue SMARTIA S67 has been renewed.
- Corrections on glazing cuttings and setting block quantities (for fixed typologies only)
12/16/2019
The technical catalogue SMARTIA M7 has been renewed.
- New content on pages 270 and 271.
12/12/2019
The technical catalogue SUPREME SF85 has been renewed.
- Glazing block bridge 290-85-010-03 has been replaced with 290-00-004-00 and 290-00-005-00 , 4mm and 5mm (typologies: Νο12 - Νο15)
12/12/2019
The SUPREME S77 catalogue has been renewed.
- The profile S67178 has been removed from the catalogue.
- Advance plus section has been added on the technical catalogue on page 7.
November 2019
11/12/2019
New certification for the SUPREME S77 system from ift Rosenheim:
Pivot window in horizontal axis S77 (dimentions: 1500X1500)
- Air Permeability : Class 4
- Water tightness : Class E1050 (1050Pa)
- Resistance to wind load : C5/B5
September 2019
9/30/2019
A new accessory has been created for the SMARTIA curtain wall system M7. It provides anchorage to external shading louvres or any other architectural element which might need to be fixed on the external face of the curtain wall. The code is 720-70-025-00. The technical catalogue has been updated.