Technical News
Find what you need fast and easily
January 2020
1/15/2020
Kooltherm code numbers replaced with NRG bar code numbers (profile 1:1 chapter)
1/13/2020
The Μ8217 and Μ8219 (1:1profiles, Sections and typology characteristics) have been added in the catalogue.
1/10/2020
- S67014 , S67016 profiles have been added on the catalogue.
1/10/2020
- 35mm locks have been removed from General Milling - Tooling Operations Chapter (pages 72-76)
1/9/2020
The screw (Μ8Χ30) 798.82.308.30 has been added for the NAXOS system.
December 2019
12/20/2019
The technical catalogue SMARTIA S67 has been renewed.
- S67914T - Profile for hidden sash has been added on the catalogue.
12/19/2019
The technical catalogue SMARTIA S67 has been renewed.
- Corrections on glazing cuttings and setting block quantities (for fixed typologies only)
12/16/2019
The technical catalogue SMARTIA M7 has been renewed.
- New content on pages 270 and 271.
12/12/2019
The technical catalogue SUPREME SF85 has been renewed.
- Glazing block bridge 290-85-010-03 has been replaced with 290-00-004-00 and 290-00-005-00 , 4mm and 5mm (typologies: Νο12 - Νο15)
12/12/2019
The SUPREME S77 catalogue has been renewed.
- The profile S67178 has been removed from the catalogue.
- Advance plus section has been added on the technical catalogue on page 7.
November 2019
11/12/2019
New certification for the SUPREME S77 system from ift Rosenheim:
Pivot window in horizontal axis S77 (dimentions: 1500X1500)
- Air Permeability : Class 4
- Water tightness : Class E1050 (1050Pa)
- Resistance to wind load : C5/B5
September 2019
9/30/2019
A new accessory has been created for the SMARTIA curtain wall system M7. It provides anchorage to external shading louvres or any other architectural element which might need to be fixed on the external face of the curtain wall. The code is 720-70-025-00. The technical catalogue has been updated.
9/3/2019
- Seal gasket 220-11-002-01 replaced with: 220-00-930-03, on typologies: No 1-6
- New typology sash inside of sash added on catalog
- 220-11-449-12 gasket for glazing bead replaced with 220-31-230-03
August 2019
8/5/2019
In SMARTIA M10800 skylight system, we have created accessory codes for profiles AL10858 and AL10859. These codes are 720-10-858-00 and 720-10-859-00. The length of the profiles in these accessory codes is 350mm.
- 720-10-858-00 is composed of 2 profiles (AL10858) with a length of 350mm each.
- 720-10-859-00 is composed of 4 profiles (AL10859) with a length of 350mm each.
8/5/2019
We have created 4 new adaptor profiles for SUPREME S700 and SMARTIA S560, which can be used to combine these 2 systems with casement systems like S67, S77 and S91. These profiles cover the back part of the tracks in order to fix frames of casement systems. The new profiles are S30572, S30574, S70826 and S70828.
8/5/2019
SMARTIA M7 structural system can now offer 3 different variants concerning the inner glass of the IGU. We now have options for 6mmm, 8mm and 12mm width of inner glass.
In order to achieve this, we are using 3 different glass holders:
- 720-10-968-00 for 6mm inner glass
- 720-10-969-00 for 8mm inner glass
- 720-10-970-00 for 12mm inner glass