Technical News

• Profile cuttings were corrected as it regards the replacement of the trimming profile S35019 in all pocket typologies
  

• Cutting for the interlock profile S35018 corrected from (Η-132,2mm) to (Η-120,8mm)

• Fixing of transom-mullion connector added on the pages 214-215 

• Intermediate entry guide (set) 765-13-704-03 was replaced by 765-13-804-03 (piece) for better leveling (alignment) of the shutter, quite significant especially in the case of large perforation slats

• Motor rail’s kick plate for sliding gate 1000mm has been added on the accessories chapter

• Assembly of flyscreen sash S490 with narrow sash S371 added on the Fabrication manual

• Profiles S63174 (track profile), S63175 (track profile) and S63172 (subsill) were removed from the catalogue due to not perfect sealing of the flyscreen in 3 sash configurations.

• Frame's mechanical corner cleat code 125-11-252-00 replaced by 125-11-257-00
• Using the offset corner cleat for S560 frame so that the punch pressing machine can perform the machining.
• Sash's mechanical corner cleat code 125-13-241-00 was replaced by 125-13-241-01.
• Using the offset corner cleat for S560 sash so that the punch pressing machine can perform the machining.

• Sash's mechanical corner cleat code 125-13-241-00 was replaced by 125-13-241-01.
• Using the offset corner cleat for S560 sash so that the punch pressing machine can perform the machining.
• Assembly of flyscreen sash S490 with narrow sash S371 added on the Milling-Toolings operation chapter

• Flat box 185X205mm (138-205) added on page 64
• Profiles 138024 and 138026 added on profiles and profiles index chapters Accessory 765-13-820-03 Insulators for side caps added on accessories chapter

• 470-67-300-00 (CUTTING AID FOR S67 SASHES) & 470-67-400-00 (REVERSED CUTTING AID FOR S77 SASHES S67) added to the technical catalogue

• 470-77-300-00 (CUTTING AID FOR S77 SASHES) & 470-77-400-00 (REVERSED CUTTING AID FOR S77 SASHES S77) added to the technical catalogue.

Accessories that were added to the accessories chapter:

• 700-78-100-00 SET SUPPORT UNIT ON FLOOR WITH STOP CLIP and
• 700-78-200-00 SET SUPPORT UNIT ON FLOOR WITH FRONT MOUTED BRACKET added on the accessories chapter

• Additional profile M12556 (water dripper) added on the profiles and profile index chapters

• Glazing setting blocks updated on page 254
• Spacer for striker of hook single door lock code 470-85-028-00 replaced by 470-85-028-01
• Locking mechanism code 424-85-036-00 with visible screws and Locking mechanism code 424-85-037-00 with hidden screws added on accessories chapter

• Sections for M9845 chapter for lighter constructions added on the technical catalogue

3 typologies for ventilations panels were added to the technical catalogue:

• No 35 Single fixed with frame and integrated flyscreen
• No 36 Single fixed
• No 37 Single side-hung casement with glazing and integrated flyscreen
• Additional profile M9415 and louver M5613 added on the profiles 1:1 Chapters of profiles and accessories updated

• Corner adjoining profile fixing details added on General Milling - Tooling Operations chapter (page 242)
• Low threshold sash details added on General Milling - Tooling Operations chapter (page 244)
• Placing hunged flyscreen and flyscreen handle 610-00-701-00 added on General Milling - Tooling Operations chapter (page 261-262)
• Accessories chapter updated

• Additional profile M12556 (water dripper) added on the profiles and profile index chapters

• 350-02-715-03 Hinge and 350-02-716-03 Hinge with spring replaced by 350-02-715-ΧΧ and 350-02-716-ΧΧ because they are available in white color also.