Technical News
Find what you need fast and easily
March 2024
3/28/2024
- Glazing has been update with separate chapter and glazing configuration for M84002 per glazing thickness has been added
3/28/2024
- Machinings 660-00-702-00 pvc for frame guides have been added
- Drainage plan for frame S70798 for fixed with sliding INDOOR has beed added
- In typology 20 Fixed with sliding INDOOR the cutting of the frame additional profile S70758 has been corrected
- S70758 machining that applies in typology Fixed with sliding INDOOR has been added
3/28/2024
- Corner locking machining has been added on pages 194, 195
3/28/2024
- Sections of the corner typologies have been updated
3/28/2024
- Two typologies 27 & 28 with winbreak Euronut Hardware have been added
- Two typologies 37 & 38 with winbreak
- Euro-groove Hardware have been added
- Hidden sashes have been added on diagrams of the sash dimension constraints
3/28/2024
- Profiles that have been added: Μ70039, Μ70073, Μ70138, Μ70140
- S-20x15x1,2 profile has been replaced by S-20x15x1,3
- Machinings for profiles M70079, M70080 M70085 have been added
- Detailed list of thermal break selection and pressure plate screw length depending on glazing width
- Machinings of M70027 have been changed
- Hyperlink of profiles in Profile Index with the IPM
- New flexible menu with Bookmarks and dynamic table of contents
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/5/2024
- Max dimension for hidden sashes have been added on sash dimension constraints
3/5/2024
- Detailed table of cuttings has been added
3/5/2024
- Double roller 6001450000 has been removed and its replacement with the double roller 6000450000 and the external base 6000450000 on the table of change list from lift and slide to sliding sash M4542.
- Cutting of the profile M4566 (adjoining profile) has been corrected. Η-130 is the right one.
3/5/2024
- Cuttings of 45 degrees for the glazing bead S77077 have been corrected in typology 21 Double sidehung casement, tilt and turn with narrow adjoining profile and hidden sash
- Locks with theirs machinings have been added on the chapter of general milling-tooling operations
- Additional profile cuttings have been corrected in typology 22
3/5/2024
- Cutting of flyscreen additional profile S333 has been corrected in typology PS5
3/5/2024
- Quantities of the flyscreen S490 have been corrected in typology 4 Four sash parallel sliding window in meeting stile with fly screen.
- Quantities of the flyscreen S371 have been corrected in typology 12 Six sash narrow parallel sliding in 90 assembly window in meeting stile with fly screen.
- Quantities of the flyscreen S490 have been corrected in typology 23 Double sash pocket sliding in 90°/45°assembly window in meeting stile with fly screen.
- Cuttings and quantities of the flyscreen S371 have been corrected in typology 34 Double sash pocket sliding window in meeting stile with glass - fly screens & shutters.
3/5/2024
- Add-on profile S50143 for IFS flyscreen and its magnetic gasket 7660094000 have been added
3/5/2024
- Add-on profile S50143 for IFS flyscreen and its magnetic gasket 7660094000 have been added
- IFS stripping piles in typology 19 Two-sash sliding window with IFS have been corrected
3/5/2024
- Add-on profile S50143 for IFS flyscreen and its magnetic gasket 7660094000 have been added