Technical News
Find what you need fast and easily
December 2022
12/14/2022
- Cutting of the flyscreen sash M868 has been corrected into W/2-18mm
12/14/2022
- Cutting of the flyscreen sash M868 has been corrected into W/2-23mm.
- Gasket for frame rails 240-00-312-01 added on the typologies 22,23,24.
- Cutting for the interlocking profile S343 has been corrected into Fh-87 on the typologies 22,23,24.
- Cuttings of typology no.9 have been corrected Four sash parallel sliding with fly-screen.
- The quantity of the stainless steel driver 660-00-450-00 has been corrected in 3 pieces in typologies 7,8,9.
12/14/2022
- Corner connection for S77 hidden sash has been updated page 265
12/14/2022
- Extended frames S85062, S85064 & S85066 added on the chapter of profile index and profiles 1:1.
12/14/2022
- Rosette spacer for glass code 455-20-052-00 has been added on all typologies with glass panel and also on the chapter of accessories.
- Nο1 S11520 upper frame boxer machining, Νο 2 S11514 frame lock side, Nο 14 & No 15 S11514 milling operations have been updated on the chapter of General Milling Tooling Operations. Νο 12 machining for S11516 upper sash has been also added on the same chapter.
12/7/2022
- Base profile gasket code 2000820903 has been added and all sections have been changed.
12/7/2022
- Width adjuster height has been corrected in typology No3, outward opening 3panels on one side folding door, low threshold and transom
12/7/2022
- Glazings as regards the inner gaskets 200-09-00X-01 have been corrected.
12/7/2022
- Glazings as regards the inner gaskets 200-09-00X-01 have been corrected.
12/7/2022
- The chapter of drainage machinings has been updated by adding pocket typologies.
- Assembly of thermal insulation zone for inwall track has been added page 46
12/7/2022
- Inwall typologies have been added.
- Glazing bead M4584 for anodizing has been added.
- Corversion list from lift &slide typology into sliding has been corrected.
- Reinforcing inserts have been added on stiffeners profiles M4577 & Μ4579.
- Dimensional restrictions of the sashes have been updated with the reinforcing inserts for stiffeners
November 2022
11/23/2022
- Frame S30548 replaced by S30562 and its milling tooling operations
11/23/2022
- Pvc machining has been corrected and clarifications have been added (in-out) page5.
- Frame connections have been updated page 10.
- Machinings of interlocking profile S35027 has been added on pages 14,16,18.
11/23/2022
- Add on profile for flyscreen S376 has been replaced from S333 due to technical improvement.
- Frame S30548 replaced by S30562 for optimal operation.
11/23/2022
- Add on profile for flyscreen S376 has been replaced from S333 due to technical improvement
11/23/2022
- Add on profile for flyscreen S376 has been replaced from S333 due to technical improvement.
- Μachining for hook profile for narrow fly-screen sash has been updated.
11/23/2022
- Add on profile for flyscreen S376 has been replaced from S333 due to technical improvement.
- Μachining for hook profile for narrow fly-screen sash has been updated.
11/23/2022
- Add on profile for flyscreen S376 has been replaced from S333 due to technical improvement.
- Μachining for hook profile for narrow fly-screen sash has been updated.
11/23/2022
Cuttings has been updated.
Bellow accessories have been added on the chapter of accessories:
- 8305701000 End cap for mullion 120 that replace the 4355700800
- Sliding gate’s stopper 8300020200
- Battery kit for NICE automatic gates 8302412400
- 4358705900 Somfy Tahoma
Changes have been made to Nice and Somfy motors
11/23/2022
- Correction: Screws used in the connection transom - mullion are 4,2mm pages 234,235