Technical News
Find what you need fast and easily
January 2023
1/18/2023
- Milling tool for Kickplate code 852-19-042-00 added on the chapter of accessories and its Millings on the chapter of Milling-Tooling Operations page 304
December 2022
12/22/2022
- 4603404000 SIMPLE CYLINDER 80mm 35-10-35 (40/40) has been replaced with 4603454500 CYLINDER 90mm 40-10-40 (45/45)
12/22/2022
- Cuttings of drainage profile width Μ63163 (W - 148mm) and subsill widths Μ63173 & Μ63171 (2W - 3mm) have been corrected in typologies Ig One sash pocket with gutter & Ifg One sash pocket window with flyscreen and gutter
12/22/2022
- Force Fitting Corner code 1500520000 for the track profiles has been replaced by 1500520010
12/22/2022
- Force Fitting Corner code 1500520000 for the track profiles has been replaced by 1500520010 in all technical catalogue.
- Their difference between them is that the new one has a hole to take a nail and make the frame more stable.
- Track profiles of the system S350 have been removed from the chapter of profiles
12/22/2022
- Code 311-03-568-03 (Weathering sponge for caps of interlocking profiles) has replaced by 311-13-568-03 (Upper and lower weathering sponge for caps of interlocking profiles set) in sliding typologies and with code 311-23-568-03 (Upper weathering sponge for caps of interlocking profiles pieces) in lift and slide typologies
12/22/2022
- Code 311-03-568-03 (Weathering sponge for caps of interlocking profiles) has replaced by 311-13-568-03 (Upper and lower weathering sponge for caps of interlocking profiles set) in sliding typologies and with code 311-23-568-03 (Upper weathering sponge for caps of interlocking profiles pieces) in lift and slide typologies
12/22/2022
- Setting block 5 mm code 290-00-005-00 has been added on all sections, accessory cuttings and on the chapter of accessories for better alignment during installation. Additionaly, the widths of profile cuttings have been changed.
12/22/2022
- Machinings for reversed interlocking have been added on pages (59-65)
12/22/2022
- 3 news typologies with reversed interlocking added on the typologies cutting lists:
- I Three-sash sliding window with 2 fixed
- Ιf Three-sash sliding window with 2 fixed and top hung flyscreen
- J 2track-4sash sliding window with 2 fixed
- 5 profiles added on the chapter of profiles
- S31731 sash, S31733 & S31759 stiffeners, S31749 & S31750 interlocking profiles
- Cuttings of S31698 add-on profile have been changed
- The chapter of accessories has been updated
12/14/2022
- Cutting of the flyscreen sash M868 has been corrected into W/2-18mm
12/14/2022
- Cutting of the flyscreen sash M868 has been corrected into W/2-23mm.
- Gasket for frame rails 240-00-312-01 added on the typologies 22,23,24.
- Cutting for the interlocking profile S343 has been corrected into Fh-87 on the typologies 22,23,24.
- Cuttings of typology no.9 have been corrected Four sash parallel sliding with fly-screen.
- The quantity of the stainless steel driver 660-00-450-00 has been corrected in 3 pieces in typologies 7,8,9.
12/14/2022
- Corner connection for S77 hidden sash has been updated page 265
12/14/2022
- Extended frames S85062, S85064 & S85066 added on the chapter of profile index and profiles 1:1.
12/14/2022
- Rosette spacer for glass code 455-20-052-00 has been added on all typologies with glass panel and also on the chapter of accessories.
- Nο1 S11520 upper frame boxer machining, Νο 2 S11514 frame lock side, Nο 14 & No 15 S11514 milling operations have been updated on the chapter of General Milling Tooling Operations. Νο 12 machining for S11516 upper sash has been also added on the same chapter.
12/7/2022
- Base profile gasket code 2000820903 has been added and all sections have been changed.
12/7/2022
- Width adjuster height has been corrected in typology No3, outward opening 3panels on one side folding door, low threshold and transom
12/7/2022
- Glazings as regards the inner gaskets 200-09-00X-01 have been corrected.
12/7/2022
- Glazings as regards the inner gaskets 200-09-00X-01 have been corrected.
12/7/2022
- The chapter of drainage machinings has been updated by adding pocket typologies.
- Assembly of thermal insulation zone for inwall track has been added page 46