Technical News
Find what you need fast and easily
August 2021
8/25/2021
- The revised horizontal section in typology 8 (Single sash entrance door
opening inward with glass Panel and one fixed side sash). Revised
cutting lists and accessories are also added in this typology. In typology 9
(Single sash entrance door opening inward with glass Panellone fixed
side sash with transom and kickplate) & typology 10 (Single sash
entrance door opening inward with glass Panel one fixed side sash with
vertical T and concealed drainage kickplate) we added S77564 Transom
profile cutting dimensions
8/25/2021
- Gasket for fly-screen 7,7 mm code 250-07-310-3x replaced by gasket for fly-screen 6,4 mm code 250-06-220-33, flyscreen net is fitted with gasket 6.4mm on M630 flyscreen profiles
8/25/2021
- Added profiles, that correspond to the glazing list table
8/25/2021
- Trimming profile S35019 was replaced in all pocket typologies. Cutting lists, profiles and accessories chapters are updated
8/25/2021
- Trimming profile S35019 was added in all pocket typologies
- Profiles and accessories chapters are updated
- Upper Stopper 6601030100 added on the typology ils9 "Two Sash Meeting Stile Pocket Lift & Slide Window with Narrow Flyscreen and Shutter Short sash use only S560"
8/25/2021
- Certificate DIN 18008-4 (ApB), which is very useful for the markets of Germany, Switzerland and Austria, is added on page 7.
July 2021
7/26/2021
- Dimensional limitation updated.
- The calculation of the static diagrams is now made according to EN 14024
7/26/2021
- Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024
- General Milling-Tooling Operations chapter was updated
7/26/2021
- Typology Af Two-sash sliding window with top-hung flyscreen added on the technical catalogue. Profiles, sections, typologies cutting lists and accessories updated.
7/26/2021
- Four new typologies (no 4, no 6, no 9, no 12) with the new threshold S11536 and the additional profiles S11537 & S70773 added on the technical catalogue. Τhose profiles also added in the profiles chapter
- Accessories that added to the technical catalogue: 210-11-536-03 (Central Gasket for SD115 Threshold), 250-11-514-03 (Frame gasket SD115), 250-11-516-03 (Frame gasket SD115) & 310-11-536-00 (Threshold connection cap)
- Central gasket 220-10-003-03 was replaced with the central gasket 250-11-514-03 in all typologies.
- Central gasket 220-10-004-03 was replaced with 250-11-516-03 in vent-frame head condition.
7/26/2021
- Τ-profile M19874 added on the profiles 1:1. This profile is suitable with M19716 frame
7/26/2021
- Profiles M5657 Louvre & M9010 cap added on the profiles index and profiles 1:1 chapters. The section is on page 43.
7/26/2021
- Typology for an outward opening 4-panels folding door (2+2) has been removed from the catalogue.
- Τhe typologies with an even-even number of sashes (i.e. 2+2, 2+4, 4+4 etc.) are temporarily unavailable for technical reasons.
7/12/2021
- 6 typologies added: P1 Single-sash pocket window, P2 Two-sash pocket window, P3 Three-sash pocket window, P4 Four-sash pocket window, Pm1 Two-Sash with meeting stile pocket window, Pm2 Four-sash with meeting stile pocket window
7/12/2021
- Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024
7/12/2021
- Primary & secondary sash sizing dimension for doors added on general milling tooling operations chapter
7/12/2021
- New automations added on the accessories chapter.
7/12/2021
- Dimensional limitation updated. The calculation of the static diagrams is now made according to EN 14024
- Add-on profiles S67964 & S67048 added on the profile index & profile 1:1 chapters
7/12/2021
- Catalogue updated with gutter and subsills
- The correct S35019 trimming was replaced in the sections of the pocket typologies and the profile cuttings for the widths for sashes, flyscreen sashes and shutters were corrected.
June 2021
6/28/2021
- Central seal 311-00-700-00 replaced by 660-00-903-00