Technical News
Find what you need fast and easily
April 2022
4/21/2022
- Milling of hinge in threshold S11536 added on page 102
- Drainage milling for Threshold S11536 added on page 115
4/13/2022
- Additional profile S77982 replaced by S77968 for better operation in the chapter of profiles, in 9 typology Single sash entrance door opening inward with glass Panell one fixed side sash with transom and kickplate and in typology 10 Single sash entrance door opening inward with glass Panell one fixed side sash with vertical T and concealed drainage kickplate. In those typologies cuttings, sections and the list of accessories have been changed.
- Double crimping corner 5Χ4,8mm code 113-15-048-00 and crimping corner 12,6Χ31mm code 113-13-310-00 have been added on the chapter of accessories.
4/13/2022
- Crimp nail cleat 113-15-192-00 has been replaced by 114-15-192-00 for frame M19620 improving the screwing of the hinge.
- Drilling Jig For Cast T Connectors code 165-00-001-00 has been added on the chapter of accessories.
- Additional "profiles for corner typologies" M11178 and M11922 added on the chapter of profiles.
4/13/2022
Pneumatic punching machines added on the chapter of accessories:
- EX-8002020100
- EX-8002020123
- EX-8002020124
- EX-8002020125
- EX-8002020126
- EX-8002020127
4/13/2022
- Composite louver main profile M5695 added on the chapter of profiles.
- Technical information chapter has been updated. Maximum Span charts have been included for all blades.
4/5/2022
- Sash gasket 2400045601 replaced by 2400045420 for optimal operation in all technical catalogue and in fabrication manual
- Attention! the new gasket 2400045420 is installed in the sash by sliding it through the sash groove, not clamped, as shown at page 34 of the fabrication manual
4/5/2022
- Machinings of corner adjoining profiles have been updated (pages 31-36)
4/5/2022
- Sash gasket 2400045601 replaced by 2400045420 for optimal operation in all technical catalogue and in fabrication manual
- Attention! the new gasket 2400045420 is installed in the sash by sliding it through the sash groove, not clamped, as shown at page 34 of the fabrication manual
4/5/2022
- Cuttings of PVC profile for thermal break interlocking profile 660-31-609-00 have been corrected (Fh - 203mm) in all typologies
4/5/2022
- End Cap for Bottom base rail M8363 code 8308363000 added on the chapter of accessories
March 2022
3/22/2022
- You can find below the fabrication manual for the SMARTIA M450 system.
3/22/2022
- PS7 typology "Two Sash Parallel Sliding 90° Cut Right Opening Window with sash M4544" has been added.
- PS8 typology "Three Sash Sliding 90° Cut Right Opening Window with Sash M4544" has been added.
- Quantities of 6604542003 Hardware Spacer PVC have been corrected in typologies PLS6, PLS7 (7 pieces H-93).
- Quantities of profile Μ4552 Glazing bead have been corrected in typologies PLS2-PLS4 (2 pieces H-249.2).
3/22/2022
- Vulcanized corner for pivot 255-67-148-03 added on the chapter of pivot typologies (50 & 51) and on the chapter of accessories.
3/22/2022
- S77980 adjoining sash profile for inswing door added on the chapter of profiles.
- Profiles of Sashes added on the max dimensions diagrams pages 178 and 179.
- Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.
3/22/2022
- Profiles of Sashes added on the max dimensions diagrams pages 101 and 102.
- Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.
3/22/2022
- Profile M1035 Flat rolling shutter guide with 200mm wing added, compatible with 25x27 box.
- Intermediate rolling shutter divider 765-13-185-00 (cast aluminium), added in all 185x191mm boxes, i.e. flat & curved, non insulated & insulated (M13700 & M13800).
- The installation of the intermediate rolling shutter divider is added on the chapter of milling-tooling operation on page 150.
3/21/2022
- Installation of sash add on profiles for 2+2 typologies added on the chapter of assembly for accessories page 285
- Additional width S85035 A=Sw+7 has been corrected in the typology 22 OUTWARD OPENING, 2+2 4-PANELS FOLDING DOOR
3/21/2022
- Μ45028 sliding sash profile for single glazing added on profiles chapter.
- The glazing list of Μ45028 sliding sash added on the chapter of glazings.
- Chapter of accessories has been updated.
3/21/2022
- Porthole barrier for frame S30526 code 3153052600 (set) replaced by 3153052700 (pcs) in all catalogue. It is now purchased by pcs, not set
- Cuttings of Additional Frame S30538 have been corrected in W/1-126.5 and W/2-126.5 in corner typologies