Technical News
Find what you need fast and easily
April 2022
4/5/2022
- Sash gasket 2400045601 replaced by 2400045420 for optimal operation in all technical catalogue and in fabrication manual
- Attention! the new gasket 2400045420 is installed in the sash by sliding it through the sash groove, not clamped, as shown at page 34 of the fabrication manual
4/5/2022
- Cuttings of PVC profile for thermal break interlocking profile 660-31-609-00 have been corrected (Fh - 203mm) in all typologies
4/5/2022
- End Cap for Bottom base rail M8363 code 8308363000 added on the chapter of accessories
March 2022
3/22/2022
- You can find below the fabrication manual for the SMARTIA M450 system.
3/22/2022
- PS7 typology "Two Sash Parallel Sliding 90° Cut Right Opening Window with sash M4544" has been added.
- PS8 typology "Three Sash Sliding 90° Cut Right Opening Window with Sash M4544" has been added.
- Quantities of 6604542003 Hardware Spacer PVC have been corrected in typologies PLS6, PLS7 (7 pieces H-93).
- Quantities of profile Μ4552 Glazing bead have been corrected in typologies PLS2-PLS4 (2 pieces H-249.2).
3/22/2022
- Vulcanized corner for pivot 255-67-148-03 added on the chapter of pivot typologies (50 & 51) and on the chapter of accessories.
3/22/2022
- S77980 adjoining sash profile for inswing door added on the chapter of profiles.
- Profiles of Sashes added on the max dimensions diagrams pages 178 and 179.
- Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.
3/22/2022
- Profiles of Sashes added on the max dimensions diagrams pages 101 and 102.
- Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.
3/22/2022
- Profile M1035 Flat rolling shutter guide with 200mm wing added, compatible with 25x27 box.
- Intermediate rolling shutter divider 765-13-185-00 (cast aluminium), added in all 185x191mm boxes, i.e. flat & curved, non insulated & insulated (M13700 & M13800).
- The installation of the intermediate rolling shutter divider is added on the chapter of milling-tooling operation on page 150.
3/21/2022
- Installation of sash add on profiles for 2+2 typologies added on the chapter of assembly for accessories page 285
- Additional width S85035 A=Sw+7 has been corrected in the typology 22 OUTWARD OPENING, 2+2 4-PANELS FOLDING DOOR
3/21/2022
- Μ45028 sliding sash profile for single glazing added on profiles chapter.
- The glazing list of Μ45028 sliding sash added on the chapter of glazings.
- Chapter of accessories has been updated.
3/21/2022
- Porthole barrier for frame S30526 code 3153052600 (set) replaced by 3153052700 (pcs) in all catalogue. It is now purchased by pcs, not set
- Cuttings of Additional Frame S30538 have been corrected in W/1-126.5 and W/2-126.5 in corner typologies
3/4/2022
- Cutting for Hidden shoot bolt in M8354 has been added on the catalogue
- Basic typologies have been added
3/4/2022
- New in floor base profile M8229 added on the catalogue
3/4/2022
- Locking intermediate mechanism detail added on page 230 of the catalogue
3/4/2022
- Profile cutting lists have been corrected on the typologies 23 & 31