Technical News
Find what you need fast and easily
December 2024
12/2/2024
Cuttings have been corrected in typology 20 (Fixed with sliding INDOOR)
12/2/2024
FLS3 typology (Fixed - Lift & Slide Window - Fixed) has been updated with new end caps and new cuttings
12/2/2024
Τ profile drainages have been added
All the dimensions have been added on its machining (vertical and horizontal)
October 2024
10/1/2024
"The following profiles have been added on the catalogue
The following caps have been added on the catalogue"
10/1/2024
Cutting for the interlocking cover profile S534 has been corrected in typology 10 (Double sash parallel lift & slide window with narrow interlocking profile and fly-screen)
10/1/2024
Glazing cuttings have been updated because of the changing of the glazing beads
10/1/2024
"Table of available systems and typologies has been updated
End cap for M84004 Double Leaf code 310-84-004-00 has been added on typology 2
Profiles Μ70220 / Μ70221 / Μ70222 / Μ70223 have been added
10/1/2024
The chart of the louver of MAXIMUM SPAN has been updated
10/1/2024
Machinings of the additional profile S31755 for the pocket typologies have been added
10/1/2024
Corrections have been done on cuttings of pocket typologies
10/1/2024
Primer for 1 component silicone dow 776 for power coated code 770-12-050-00 has been added
August 2024
8/6/2024
Profiles that have been added:
Barcode M7045/M7055/M7063/M7066
Square profile with strips SR-20x30x1.3/SR-20x40x1.4/SR-20x50x1.4/SR-20x60x1.4/SR-25x50x1.4
Accessories that have been added:
CAPS (for 20mm frames) 8308406000/8308407000/8308408000/8308409000
CAPS (for 25mm frames) 8308353200/8308353300/8308353400/8308353500/8308353000/8308353800
Bracket for profile M8377 for NICE motor 8300837700 has been added
Bracket for profile M7045 for NICE motor 8307045000 has been added
Solution for mounting a handrail on the wall has been added
8/6/2024
- Chapter of Sash Dimension Constraints has been added
8/6/2024
- Assembly of central seal has been added
8/6/2024
- The magnetic gasket 766-00-940-00 was replaced from the code 766-00-941-00.
- This accessory is now sold in 2m bars
8/6/2024
- The magnetic gasket 766-00-940-00 was replaced from the code 766-00-941-00.
- This accessory is now sold in 2m bars
8/6/2024
- The magnetic gasket 766-00-940-00 was replaced from the code 766-00-941-00.
- This accessory is now sold in 2m bars
8/6/2024
- In typologies of the doors MD9660, in bill of materials low threshold cap 310-11-172-ΧΧ was replaced by 310-19-862-00
8/6/2024
- At the same level solution 8a section outward opening 3-1 4-panels folding door has been added
- At the same level solution 16a section inward opening 3-1 4-panels folding door has been added
8/6/2024
The following end caps and profiles have been added:
8308406000 Cap SR-20×30×1.3
8308407000 Cap SR-20×40×1.4
8308408000 Cap SR-20×50×1.4
8308409000 Cap SR-20×60×1.4
8308353800 Cap SR-25×50×1.4
General changes and updates to the NICE range.