Technical News
Find what you need fast and easily
March 2024
3/5/2024
- Add-on profile S50143 for IFS flyscreen and its magnetic gasket 7660094000 have been added
3/5/2024
- Cutting of glazing height of the fixed glass has been corrected in the typology 12 (Single sash entrance door opening inward with glass panel with add-on fixed side sash with concealed drainage kickplate)
February 2024
2/13/2024
- Νew profiles M7067, M7068, M7070 have been added.
- Profile M7057 is now available without perforations.
- Installation information for Dimmable LED.
- New Guide for selecting the trim profile according to insulation, profile barcode, and mounting base.
2/13/2024
- Accessory for striker fixation 470-65-102-00 has been added.
- Profile M65211 single glazing sash has been added on the chapter of profile as well as its glazings to the chapter of glazing.
2/9/2024
- Two component fast setting adhesive code 770-09-399-00 has been abolished
2/9/2024
- Two component fast setting adhesive code 770-09-399-00 has been abolished
2/9/2024
- Cuttings of waterproof profile S463 have been corrected in pocket typologies.
- Cuttings of narrow interlock PVC have been corrected in pocket typologies.
2/9/2024
- Replacement kit for top hinge code 350-41-080-00 has been added on chapter of accessories and fabrication manual page 142
2/9/2024
- Add-on profile (S77996) height has been corrected.
- Add-on profile (S77996) height has been corrected.
January 2024
1/23/2024
- Drainage plan for 4-sash with meeting stile has been added
1/23/2024
- Upper central seal assembly has been added
1/23/2024
- The designs of the below frame tracks have been corrected
1/23/2024
- Glazing bridge for fixed 290-19-620-00 has been added ont 39 & 43 typologies "One sash doors with fixed panels - inwards opening hidden sash"
December 2023
12/13/2023
- Diagram for the max dimensions for given wind pressure for the profiles M4548+M4577+M4548 has been corrected
12/13/2023
- General redesign of the catalogue
- Pressure and drain equalization for pressure plate and windows have been added
12/13/2023
- Both the individual profiles (i.e., the bottom side profiles) and their corresponding quads (14x19, 18x19, 22x22) have new codes. The new codes are actually the same as the old ones, with the addition of an "N" at the end, for example, new code 138-185N.
- The bottom side of all of our boxes has been changed and reduced by 4mm to improve the alignment/centering of the shutter.
12/13/2023
- Comment that the specific profiles do not use hinge 360-77-950-XX has been added on profiles S95018, S95016 & S95042
12/13/2023
- Handle machining S11531 & S11532 has been added for optimal understanding