Technical News
Find what you need fast and easily
March 2024
3/28/2024
- Glazing has been update with separate chapter and glazing configuration for M84002 per glazing thickness has been added
3/28/2024
- Corner locking machining has been added on pages 194, 195
3/28/2024
- Two typologies 27 & 28 with winbreak Euronut Hardware have been added
- Two typologies 37 & 38 with winbreak
- Euro-groove Hardware have been added
- Hidden sashes have been added on diagrams of the sash dimension constraints
3/28/2024
- Profiles that have been added: Μ70039, Μ70073, Μ70138, Μ70140
- S-20x15x1,2 profile has been replaced by S-20x15x1,3
- Machinings for profiles M70079, M70080 M70085 have been added
- Detailed list of thermal break selection and pressure plate screw length depending on glazing width
- Machinings of M70027 have been changed
- Hyperlink of profiles in Profile Index with the IPM
- New flexible menu with Bookmarks and dynamic table of contents
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/5/2024
- Max dimension for hidden sashes have been added on sash dimension constraints
3/5/2024
- Detailed table of cuttings has been added
3/5/2024
- Double roller 6001450000 has been removed and its replacement with the double roller 6000450000 and the external base 6000450000 on the table of change list from lift and slide to sliding sash M4542.
- Cutting of the profile M4566 (adjoining profile) has been corrected. Η-130 is the right one.
3/5/2024
- Cuttings of 45 degrees for the glazing bead S77077 have been corrected in typology 21 Double sidehung casement, tilt and turn with narrow adjoining profile and hidden sash
- Locks with theirs machinings have been added on the chapter of general milling-tooling operations
- Additional profile cuttings have been corrected in typology 22
3/5/2024
- Cutting of flyscreen additional profile S333 has been corrected in typology PS5
3/5/2024
- Quantities of the flyscreen S490 have been corrected in typology 4 Four sash parallel sliding window in meeting stile with fly screen.
- Quantities of the flyscreen S371 have been corrected in typology 12 Six sash narrow parallel sliding in 90 assembly window in meeting stile with fly screen.
- Quantities of the flyscreen S490 have been corrected in typology 23 Double sash pocket sliding in 90°/45°assembly window in meeting stile with fly screen.
- Cuttings and quantities of the flyscreen S371 have been corrected in typology 34 Double sash pocket sliding window in meeting stile with glass - fly screens & shutters.
3/5/2024
- Add-on profile S50143 for IFS flyscreen and its magnetic gasket 7660094000 have been added
3/5/2024
- Add-on profile S50143 for IFS flyscreen and its magnetic gasket 7660094000 have been added
3/5/2024
- Cutting of glazing height of the fixed glass has been corrected in the typology 12 (Single sash entrance door opening inward with glass panel with add-on fixed side sash with concealed drainage kickplate)
February 2024
2/13/2024
- Νew profiles M7067, M7068, M7070 have been added.
- Profile M7057 is now available without perforations.
- Installation information for Dimmable LED.
- New Guide for selecting the trim profile according to insulation, profile barcode, and mounting base.
2/13/2024
- Accessory for striker fixation 470-65-102-00 has been added.
- Profile M65211 single glazing sash has been added on the chapter of profile as well as its glazings to the chapter of glazing.
2/9/2024
- Two component fast setting adhesive code 770-09-399-00 has been abolished