Technical News
Find what you need fast and easily
July 2024
7/17/2024
- Glazing bridge 20mm code 720-35-006-00 and glazing bridge 46mm code 720-35-007-00 have been added on the chapter of accessories and their installation added on the chapter of general milling-tooling operations
7/17/2024
- Hinge installation for frame 84002+84003 has been added
June 2024
6/12/2024
Cord joint 10mm has been added on the chamber between the PVC and the frame to create a barrier in the interlocking position
6/12/2024
Adding the corner of the profile P149 with code 160-10-050-00 along with its processing
May 2024
5/13/2024
Motor code 425-40-759-00 has been changed to 425-41-767-00
Bill of materials of the electric moter 425-41-767-00 and the main body of the motor bracket 425-40-237-00 have been changed
Installation instructions for proper operation of the electric motor has been added
5/13/2024
- Brush weatherstripping pile 20mm has been added on the flyscreen typologies
- Add-on profile S50079 has been improved. Groove has been modified and the wing has been removed
5/13/2024
- Brush weatherstripping pile 20mm has been added on the flyscreen typologies
- Add-on profile S50079 has been improved. Groove has been modified and the wing has been removed
5/13/2024
- Cuttings and quantities of the flyscreen sash M868 have been corrected in typology ILS4 Meeting Stile Pocket Sliding 45⁰ Cut with Flyscreen and Shutter
5/13/2024
- 1 point lock 440-73-030-00 was replaced by 450-65-135-16. The old one used spacer for keeper 485-65-000-00 while the new one uses latches to lock up and down.
- 3point striker even-odd cutting has been added
April 2024
4/17/2024
- M7071 additional profile for the finishing of the barcode profiles has been added
- Additional decorative profile M7069 has been added
4/17/2024
- Section 12 for out->in Curtain wall has been added on the chapter of typologies sections
- Installation of bracket for out->in Curtain wall has been added on the chapter of general milling-tooling operations
- Fireproof fixing insert 6807000600 has been added on the chapter of accessories
- Span Length has been added page 244
4/17/2024
Frame corner 130-05-550-00 for frame P161 and its machinings have been added
4/17/2024
- New minimal horizontal flyscreen system (IFS typologies) has been added
4/17/2024
- End cap 3116316620 details for Two-sash sliding window with flyscreen and gutter have been added
- Flyscreen cutting has been corrected
4/17/2024
Inner glazing gaskets 200-04-023-01 (2-3mm) have been replaced by the below codes:
EX-2000900201 2mm
EX-2000900301 3mm
EX-2000900401 4mm
Inner glazing gaskets 200-04-067-01 (6-7mm) have been replaced by the below codes:
EX-2000900601 6mm
EX-2000900701 7mm
EX-2000900801 8mm
4/17/2024
- Entry guide 765-13-706-03 has been replaced by 765-13-000-00
- Intermediate rolling shutter divider 765-13-022-00 has been added on roller-shutters 137-020Ν, 137-220Ν, 138-020Ν & 138-220Ν
4/17/2024
- Standard cylinder 110mm 25-10-75 (30/80) ALUMIL NICKEL has been added on Locks page 399
- Frame for expansion joint has been added S77988
March 2024
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18