Technical News
Find what you need fast and easily
August 2022
8/2/2022
- Add-on profile S67905 added on the chapter of profiles
8/2/2022
- Secondary sash width for locking rod 440-08-670-00 added on page 13.
- In Aller Retour Second Sash Mechanism the following accessories have been added: 474-37-330-00 Upper latch keeper for doors and 474-03-738-00 Lower latch deep keeper for doors page 14
8/2/2022
- Brush pile seal 620-11-500-00 has been replaced by 620-69-114-03 for optimal operation in typologies 48&49 (aller retour doors)
8/2/2022
- Intermediate Lock Installation has been added on the chapter of general milling-tooling operation
8/2/2022
- 4 new European Groove AK8 Hardware typologies (40-43) for concealed sash added on the technical catalogue
July 2022
7/18/2022
- Insulating glazing gasket 200-06-860-01 replaced by 200-06-861-01 in the chapter of accessories for optimal operation
7/18/2022
- 6604542102 Pvc cuttings have been corrected for the typologies Pls 1, Pls 3, Pls 5, Pls 6 (45 degrees cut) page 32
- M4542 lift & slide sash and 6604542102 Pvc cuttings have been corrected for the typologies Pls2 and Pls4 (90 degrees cut) page 33
7/18/2022
- Sash gasket 2400045420, which is installed by sliding through, that is compatible only with mechanical corners replaced by 2400045601, which is installed by pressing into the groove and is compatible both with crimp and mechanicals corners
7/18/2022
- Cuttings of waterproofing profile S61317 have been corrected.
- Cuttings of Adjoining profile S67658 have been corrected.
- No head metric screw 798-83-305-06 added for the connection of the profile S67005 with the frame of the system.
7/18/2022
- New typology has been added: Outward opening, 3 panels on one side folding door with secondary door
7/18/2022
- No head metric screw 798-83-305-06 added for the connection of the add-on profile S77005 with the frame of the system
7/8/2022
- The chapter of glazings has been updated
7/8/2022
- Frame S77149 added on the index and profile 1:1 chapters
7/8/2022
- Cutting of water dripper width has been corrected (the correct one is 90 degrees)
7/1/2022
- Sash gasket 250-77-918-03 (hidden sash - short frame) replaced by 250-77-918-13 for optimal operation.
7/1/2022
- Butt joint Pivot have been temporarily removed from the technical catalogue to avoid errors. New update will be provided when the system is complete after the accessories will have been redesigned.
7/1/2022
- Glazing gasket 200-06-860-01 for 24mm glazing added in the sashes M19622 and M19626 of M9660 phos
7/1/2022
- Redesign and new solution of the rotation pin for motorized louvre 720-05-600-00, reducing the noise produced during operation