Technical News
Find what you need fast and easily
January 2022
1/4/2022
- New typology added "Three-sash sliding window with gutter"
- Accessory 112-63-000-00 "Corner set for Μ630 corner construction " added on the accessories chapter
- "Dimensional Limitations" chapter updated
1/4/2022
- Code 380-81-076-67 "WINDOW HANDLE 7mm STEEL LOOK F9" added on accessories chapter
- Handle facades 380-94-766-ΧΧ & 380-99-766-ΧΧ deleted from the accessories
December 2021
12/9/2021
- Glass unit height was changed in typology K "Three-sash parallel sliding window with flat frame" (Fh-135mm)
12/9/2021
- Correction of glazing cuttings for the typology 1 "Two Sash Parallel Sliding 45° Cut"
12/9/2021
- The technical catalogue for SMARTIA M450 system is now available
12/3/2021
- Low threshold end cap for M19862 code 310-11-172-10 replaced by code 310-19-862-00
- This end cap was added to Assembly for Accessories chapter on page 258
12/3/2021
- Code 798-21-248-32 (pan tapping screw) added on the profiles S67014-S67016-S67918-S67920-S67994 (hidden sashes) in the profiles chapter and in the accessories chapter
November 2021
11/29/2021
- Cuttings was corrected in the typology G "Four-sash parallel sliding window" in profiles: S31672, S31674, S31676
11/29/2021
- Tri fin seal brushes were replaced. Size increase (+1 mm) due to change of 3-fin brush type
11/29/2021
- End caps 311-00-600-03 added on the accessories part list with flyscreen sash S371 and on the accessories chapter
11/29/2021
- Moment of interia Ix was updated in all thermal break profiles. The measurement is per meter (<1,5 <2,0 <2,5 <3,0 <3,5 >3,5) and Ιx is calculated in compliant with EN 14024
11/19/2021
- Lift unit added on the catalogue of lift and slide mechanism
- System M450 added on the catalogue of lift and slide mechanism
11/19/2021
- New typology No39 "One sash door with fixed panel - inwards opening standard frame" added on M9660Phos chapter.
- Add-on profile M19637 added on profiles chapter of M9660Phos hidden sash and on the index of profiles concerning the specific typology
11/19/2021
- Profile S77623 (frame additional profile) added on the chapter of profiles 1:1
11/19/2021
- Profile S67644 (frame additional profile) added on the chapter of profiles 1:1
11/19/2021
- Cutting of interlock profile corrected to Fh-114mm if the track profile has no subsill and to Fh-127 if the track profile has subsill. Cutting of pocket window additional sealing profile M63170 is corrected to Fh-79.