Technical News
Find what you need fast and easily
March 2022
3/22/2022
- You can find below the fabrication manual for the SMARTIA M450 system.
3/22/2022
- PS7 typology "Two Sash Parallel Sliding 90° Cut Right Opening Window with sash M4544" has been added.
- PS8 typology "Three Sash Sliding 90° Cut Right Opening Window with Sash M4544" has been added.
- Quantities of 6604542003 Hardware Spacer PVC have been corrected in typologies PLS6, PLS7 (7 pieces H-93).
- Quantities of profile Μ4552 Glazing bead have been corrected in typologies PLS2-PLS4 (2 pieces H-249.2).
3/22/2022
- Vulcanized corner for pivot 255-67-148-03 added on the chapter of pivot typologies (50 & 51) and on the chapter of accessories.
3/22/2022
- S77980 adjoining sash profile for inswing door added on the chapter of profiles.
- Profiles of Sashes added on the max dimensions diagrams pages 178 and 179.
- Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.
3/22/2022
- Profiles of Sashes added on the max dimensions diagrams pages 101 and 102.
- Standard Cylinder and Security Cylinder added on the chapters of General Milling-Tooling Operations and accessories.
3/22/2022
- Profile M1035 Flat rolling shutter guide with 200mm wing added, compatible with 25x27 box.
- Intermediate rolling shutter divider 765-13-185-00 (cast aluminium), added in all 185x191mm boxes, i.e. flat & curved, non insulated & insulated (M13700 & M13800).
- The installation of the intermediate rolling shutter divider is added on the chapter of milling-tooling operation on page 150.
3/21/2022
- Porthole barrier for frame S30526 code 3153052600 (set) replaced by 3153052700 (pcs) in all catalogue. It is now purchased by pcs, not set
- Cuttings of Additional Frame S30538 have been corrected in W/1-126.5 and W/2-126.5 in corner typologies
3/4/2022
- Cutting for Hidden shoot bolt in M8354 has been added on the catalogue
- Basic typologies have been added
3/4/2022
- New in floor base profile M8229 added on the catalogue
3/4/2022
- Profile cutting lists have been corrected on the typologies 23 & 31
3/4/2022
- Mullion Water Evacuation Machinings have been added on the chapter of Millings page 10
3/4/2022
- Typology icon of the typology No19 was corrected (Single side-hung casement, tilt and turn with fixed and asymmetric T-Profile)
- Profile S77042 was added on profiles of machining tool 852-77-916-00 for the "T" profile of hidden sash page 264
3/4/2022
- Dimensional Limitations chapter has been updated. The diagrams are calculated in compliance with EN 14024.
February 2022
2/22/2022
- Locking solutions for sliding systems catalogue updated with the addition of the M450 system
2/22/2022
- Typology PLS12 Corner assembly with four sash parallel slide (EXTERIOR CORNER) added on the tech catalogue
- Typology PLS13 Corner assembly with four sash parallel slide (INTERIOR CORNER) added on the tech catalogue
- Typologies sections 86 & 87 that refer to the corner typologies added on the specific chapter
- Cuttings of S579 have been corrected in typology FLS1 Fixed - Lift & Slide Window with the Fixed on the Inside and FLS2 Fixed - Lift & Slide Window with Fixed Outside
2/22/2022
- Drainage adaptor code 311-63-163-03 replaced by 311-63-163-04 in all catalogue
- Accessories chapter was updated