Technical News
Find what you need fast and easily
February 2023
2/2/2023
- Screws for M65102 have been added on the accessory list of the typologies
2/2/2023
- S77046 reversing profile width has been corrected in 39 typology (Pivot vertical axes)
2/2/2023
- S67048 reversing profile width has been corrected in 51 typology (Pivot vertical axes)
January 2023
1/18/2023
- Assembly of T-connector has been added page 58.
- Assembly of central seal has been added page 59.
1/18/2023
- Τwo new typologies have been added on the technical catalogue: FLS4 Fixed - Lift & Slide Window with Fixed on the Inside, Narrow Interlock and FLS5 Fixed - Lift & Slide Window with Fixed on the Outside, Narrow Interlock
1/18/2023
- Corner flyscreen adjoining profile code S30569 has been added on the chapter of profiles and its end cap code 311-30-569-00 has been added on the chapter of accessories.
1/18/2023
- The quantity of the end cap 90 Deg Cut code 3113501100 has been corrected in PS3, PS6, PS9 typologies.
1/18/2023
- In cuttings of pocket typologies additional profile M12242 has been replaced with S380.
- In typology No.15 Two sash in wall sliding with fly-screen and in 16 typology Two sash in wall sliding with fly-screen and shutter the cuttings of adjoining profile S360 have been added.
- In typology No.16 the code of adjoining profile of shutter S327 has been replaced with S361, its cutting has been corrected to Sh-40 and also end covers 311-10-360-03, 311-14-254-03, 311-00-361-03 have been added on the accessory cuttings.
1/18/2023
- Milling tool for Kickplate code 852-19-042-00 added on the chapter of accessories and its Millings on the chapter of Milling-Tooling Operations page 304
December 2022
12/22/2022
- 4603404000 SIMPLE CYLINDER 80mm 35-10-35 (40/40) has been replaced with 4603454500 CYLINDER 90mm 40-10-40 (45/45)
12/22/2022
- Cuttings of drainage profile width Μ63163 (W - 148mm) and subsill widths Μ63173 & Μ63171 (2W - 3mm) have been corrected in typologies Ig One sash pocket with gutter & Ifg One sash pocket window with flyscreen and gutter
12/22/2022
- Force Fitting Corner code 1500520000 for the track profiles has been replaced by 1500520010
12/22/2022
- Force Fitting Corner code 1500520000 for the track profiles has been replaced by 1500520010 in all technical catalogue.
- Their difference between them is that the new one has a hole to take a nail and make the frame more stable.
- Track profiles of the system S350 have been removed from the chapter of profiles
12/22/2022
- Code 311-03-568-03 (Weathering sponge for caps of interlocking profiles) has replaced by 311-13-568-03 (Upper and lower weathering sponge for caps of interlocking profiles set) in sliding typologies and with code 311-23-568-03 (Upper weathering sponge for caps of interlocking profiles pieces) in lift and slide typologies
12/22/2022
- Code 311-03-568-03 (Weathering sponge for caps of interlocking profiles) has replaced by 311-13-568-03 (Upper and lower weathering sponge for caps of interlocking profiles set) in sliding typologies and with code 311-23-568-03 (Upper weathering sponge for caps of interlocking profiles pieces) in lift and slide typologies
12/22/2022
- Setting block 5 mm code 290-00-005-00 has been added on all sections, accessory cuttings and on the chapter of accessories for better alignment during installation. Additionaly, the widths of profile cuttings have been changed.
12/22/2022
- Machinings for reversed interlocking have been added on pages (59-65)