My Workplace
My Watchlist
Here you can see those items that you saved into watch-list. You need to login in order see these items.
Find what you need fast and easily
April 2024
4/17/2024
- Standard cylinder 110mm 25-10-75 (30/80) ALUMIL NICKEL has been added on Locks page 399
- Frame for expansion joint has been added S77988
4/17/2024
- Add-on profile M9407 has been added on the profiles and its assembly with the profile M9334 on the chapter of assembly
March 2024
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18
3/28/2024
- Assembly and M63170 machining for 2-sash parallel sliding pocket window has been added typology 18
3/28/2024
- Glazing has been update with separate chapter and glazing configuration for M84002 per glazing thickness has been added
3/28/2024
- Machinings 660-00-702-00 pvc for frame guides have been added
- Drainage plan for frame S70798 for fixed with sliding INDOOR has beed added
- In typology 20 Fixed with sliding INDOOR the cutting of the frame additional profile S70758 has been corrected
- S70758 machining that applies in typology Fixed with sliding INDOOR has been added
3/28/2024
- Corner locking machining has been added on pages 194, 195
3/28/2024
- Sections of the corner typologies have been updated
3/28/2024
- Two typologies 27 & 28 with winbreak Euronut Hardware have been added
- Two typologies 37 & 38 with winbreak
- Euro-groove Hardware have been added
- Hidden sashes have been added on diagrams of the sash dimension constraints
3/28/2024
- Profiles that have been added: Μ70039, Μ70073, Μ70138, Μ70140
- S-20x15x1,2 profile has been replaced by S-20x15x1,3
- Machinings for profiles M70079, M70080 M70085 have been added
- Detailed list of thermal break selection and pressure plate screw length depending on glazing width
- Machinings of M70027 have been changed
- Hyperlink of profiles in Profile Index with the IPM
- New flexible menu with Bookmarks and dynamic table of contents
3/13/2024
Read the article about the dynamic presence of GLM Outdoor Solutions, the official manufacturer of our advanced outdoor systems, at R+T Stuttgart, the leading trade fair for shading products and doors/gates.
3/13/2024
Discover the latest 60-minute fire resistance certification the SMARTIA M7 FR curtain wall system has received from ift Rosenheim.
3/7/2024
Alumil joins Horizon Europe’s RecAL project, which is aimed at revolutionising aluminium recycling in Europe. Collaborating with 18 partners, Alumil will contribute to developing innovative recycling technologies, driving towards a circular aluminium economy, and reinforcing Europe’s leadership in sustainability.
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/7/2024
- Fixing of the profile S50143 has been added on fabrication manual of each system
3/5/2024
- Max dimension for hidden sashes have been added on sash dimension constraints