AlumilCal Database Update - 21001
- General
- Connect 200 EX-4155560000 is replaced by Connect 50 EX-4155560500.
- In all flyscreen pocket typologies the inserted filling now appear in the material analysis.
- Uf for S560, S61, S77, M450 and S350 were added.
- Alujet 606 Windows hardware is reactivated and updated according to the latest HCID.
- Striking plate INT-6403162413 is replaced by INT-6403162423 in S650/S650 eclipse.
- Concealed cable duct EX-4156298600 is replaced by EX-4154098516.
- Flush handle EX-61024570XX was replaced with EX-63064522XX.
- Series S560
- Hardware is available again when using S584 sash all around.
- Series M7
- Typologies from S560 and S560 LT can be inserted in M7.
- Series S61
- Mechanical corners added for the frames S61652,S61654,S61510 and sashes S61936,S61976,S61978,S61552,S61893,S61734.
- Series S700
- In subseries eclipse drainage machining for track S70842 for typologies 2-sash sliding, 3-sash sliding και 4-sash sliding meeting stile has been corrected.
- Series S325
- Pop up handle EX-1078010XX is replaced by EX-61078011XX.
- Series S61
- Added machining for mechanical corners 125-XX-XXX-XX for frames S61652/S61510 - sashes S61936/S61976.
- Series S560 NEW
- Central seal gaskets are corrected according to the catalogue.
- Slave leaf handle is misplacement and the missing flush handle for slave leaf are corrected.
- iTransom profile S586 cutting length is corrected when its used in monorail fixed.
- In narrow interlock locking with extra locking points and extensions are available again.
- Corrected machining for S534 narrow interlocking cap EX-3110055210.
- Sash ventilation machining for sashes S560 and S584 is changed.
- Corrected lock position in corner typology.
- Series S650
- Striking plate INT-6403162413 is replaced by INT-6403162423.
- Cutting length for interlock S31731 are corrected according to the catalogue.
- Minimal handle fixed INT-61065203XX is replaced by INT-61065213XX.
- Flyscreen roller in Basic and Flat frame INT-6002565100 is replaced with EX-6002565200.
- Μishandling device ΙΝΤ-6406500910 is added in corner typologies.
- Series M9400
- Glazing beads M9311 and M9312 were added for glazing thickness 4-5mm and 18-21mm, respectively.
- Series S77FR
- Added machining for base glass fixing ΕΧ-6807700100.
- Series M450
- Quantity of the bumper EX-6500454201 is corrected in 2-sash sliding typololgy.
- Series S77
- Frame S77572 is added in door and hidden sash typologies.
- In typology for door open out, flush face, in the hardware section the escape door function hardware is available.
Related Files
