Në kompaninë tonë, çdo sistem prej alumini ekzistues ose i ri supzohet të shoqërohet me certifikatat përkatëse të performancës. Bashkëpunimi ynë shumëvjecar me institutet e njohura ndërkombëtarisht që plotësojnë kërkesat e tregut global na jep një avantazh konkurrues dhe unik. Kështu, ne mund të jemi të sigurt se produkti përfundimtar përmirëson cilësinë e jetës së përdoruesit fundorë.
u themelua në vitin 1966 nga një ekip shkencëtarësh, inxhinierësh dhe profesionistësh në fusha të ndryshme të ekspertizës. I pajisur nga laboratorë shumë modernë që ofrojnë një vizion holistik për ndërtimin e elementeve dhe strukturave të ndërtimit. Aktiviteti kryesor i institutit është ofrimi i hulumtimeve dhe çertifikimeve të cilat plotësojnë kërkesat e industrisë së prodhimit të dritareve, fasadave dhe dyerve, panvarësisht nga materialet që janë përdorur për të. Certifikatat e institutit mbulojnë çështje që lidhen me standardet, kërkimin shkencor, akreditimin si dhe verifikimin e testeve ose llogaritjeve të kryera.
Passive House Institute
Instituti I Shtëpive Pasive (PHI) është një institut i pavarur kërkimi i cili mund të përshkruhet si qendra e kërkim, zhvillimit të idesë së shtëpive pasive. Që nga viti 1996, kur u krijua, ai mban një karakter bashkëpunues dhe ndihmon në ndërtimin e çertifikimit sipas standardit të vetëm të performancës energjetike të njohur ndërkombëtarisht.
Qendra Franceze Shkencore dhe Teknike për Ndërtimin u ofron palëve të interesuara një gamë të gjerë testimesh dhe çertifikimesh të proceseve të prodhimit. Matjet kryhen në laboratorin e saj 2.500 metra katror, i cili përfshin tre hapsira të mëdha testimi dhe katër ambjente mbështetëse. Më saktësisht, CSTB kryen teste për të siguruar që prodhimi i profileve të izoluar termik të aluminit (lidhja e profileve me thyerjen termike) është sipas procedurave përkatëse të përcaktuara me standarde.
An institute that does not restrict its operation to the obligatory field of European directions, but extends its activity by offering quality and performance measurements and certification under national law. In addition to its basic function,
Istituto Giordano carries out research activities and takes over the design and training of the test system itself to the stakeholders. Its certificates are recognized and respected
The UBAtc is
the only Belgian authority that offers technical approval for
construction materials, products, systems, and installers. It provides
not only national but also European technical
certifications. As a result, it covers every requirement, since the
European Technical Approvals (ETA) are strictly confined to the
regulatory environment and European Directive 89/106 /EEC, and National
Technical Approvals (ATG) are voluntary evaluations
covering regulated and non- regulated characteristics, proofing the
suitability for the intended use.
The British company provides services that fit into a range of tests and measurements to certify that the controlled products conform to a set of industry standards and regulations. Indicatively, specific studies covering the CWCT, PAS 24, Secured by Design and NHBC requirements can be reported. It is important to note that WINTECH cooperates and provides its services to companies producing curtain walls, glass panes, and window frames.
Headquartered in Central & North America, CLEB provides in-depth
studies and certifications that fully meet the requirements and needs of
industry companies. With offices and workshops in Montreal, Chicago,
Quebec, Ottawa, Truro and New York, it has a strong presence and high
credibility. Certified researches are conducted based on global
standards verify the results of the testing and calculating procedures
that are carried out.
For over 70 years, the Building Research Institute (ITB) has been conducting laboratory research for the construction industry and is managing the implementation and practical application of its results. With the official supervision of the Polish Ministry of Investments and Economic Development, it uses state-of-the-art research methodologies and specialized measurement equipment, supporting construction development both in the country and abroad.
one of the world's leading providers of quality and security solutions
for a wide range of industries worldwide, carried out the acquisition of
Architectural Testing Inc. (ATI)
in 2013. Till now, combines its credibility with the experience of a
major testing and certification company in North America, and it
approves system performance based on scientific measurements and
Element Materials Technology
Element Materials Technology is a global provider of Testing, Inspection and Certification services for a diverse range of materials and products in sectors where failure in service is not an option. The objective is to certify both the materials and the products for complying with all the relevant requirements and safety demands during their final application. Also, aims to prove that there are consistency and marketable quality, compliance with all the relevant industry standards and regulations, and finally materials and products are suitable for the intended purpose that is made for.
NTCL (National Certified
Testing Laboratories) is a fully-recognized, independent testing and
research laboratory for architectural and construction industries
operating since 1977, accredited by ISO / IEC 17025. It is a
fast-growing research center providing high-quality
services in industry companies, due to its extensive
experience and modern equipment.
Thomas Bell-Wright International
Thomas Bell-Wright International Consultants is a specialized IT company based in Dubai. Since 1995 provides independent testing, inspection and certification services (TIC) primarily for the construction industry. It focuses on large commercial buildings and provides its services in order to ensure the successful building of architectural elements. At the same time, it ensures the quality and performance of building materials on issues related to fire and security risks.
Riverbank Acoustical Laboratory
Laboratories is an NVLAP-acclaimed soundproof testing service
founded by Wallace Clement Sabine in 1918. The current organization
remains a highly respected source of independent processes regarding
testing the soundproof specifications of a product.
RAL specializes in STC (sound transmission loss by ASTM
E90), NRC (sound absorption per ASTM C423), IIC (impact sound
transmission by ASTM E492) and sound power test (ISO 6926).
Aristotle University of Thessaloniki is one of the largest university institutes in Greece, was founded in 1925 and its main activity is in the field of education. Apart from this, AUTH “exploits” its technical knowledge and the specialized staff, in order to provide certifications and soundproof tests of aluminium systems.
National Technical University of Athens
Headquartered in Athens and founded in 1836, NTUA is
the oldest technological university in Greece, contributing to the
scientific, technical, social and economic development of the country.
By providing soundproof and fire safety researches and
certifications, it is linked to the market by offering a strong
competitive advantage to companies in the aluminium industry.
The MT group was established in 1980 and represents one of the largest testing and inspection companies serving the construction industry in the mid-Atlantic and northeastern regions. The tests performed in the company's modern laboratories are conducted in accordance with ASTM, AAMA, AASHTO, NVLAP or the Engineering Army. Indicatively, the services provided include laboratory services, building and geotechnical studies, inspection, QC management, and cooperative alliances. At the same time, MT provides results from researches on materials related to structural steel, reinforcing, concrete, masonry, asphalt, and soil. Also, special tests and inspections are carried out, including windows, mechanism, and wall.
Hellenic Defense Systems
The EAS group
was established in 2004 as a result of a merging between the companies
of the Greek state Hellenic Arms Industry (EBO) and PYRKAL. When it was
created, it was the main weapon manufacturer
with many factories and thousands of workers. It produces a
range of products that include most types of weapons in use today
globally and is distinguished for its intense export activity. Thanks to
its specialized knowledge and experience,
it develops a parallel action that satisfies the market's
needs in certifications for the designation of aluminium systems as